In order to meet the demands of the project to construct a comprehensive PVC resin production plant with an annual output of 60,000 tons in Mekele, Ethiopia, China CEC Engineering Corporation purchased 3 sets of SZL series coal-fired chain grate water tube steam boiler from ZOZEN Boiler who had completed the shipment recently. ZOZEN SZL series coal-fired steam boiler has the sufficient output, a high degree of automation and a high thermal efficiency of over 82%. In order to improve the fuel utilization, there are multiple separate air chambers and air dampers installed at the lower part of the grate to achieve the precise air distribution to meet the demands of air volume needed by fuel in each combustion stage. ZOZEN Boiler also customized the dust removal, desulfurization and denitration equipment at the end of the boiler to ensure that the exhaust gas emission of the boiler could meet the local environmental protection standards.
Thermal oil heaters, also known as organic heat carrier boilers, adopt the organic heat carrier as heat medium to realize heat transfer. Due to the high temperature characteristics of organic heat carrier, thermal oil heaters can realize low-pressure and high-temperature heating with an oil output temperature of 350℃. Thermal oil heaters adopt injection-type forced circulation system and heat exchange surface adopts round and square coil structures, which also have a wide fuel adaptability of oil, gas, coal, biomass. ZOZEN Boiler, as a leader in the boiler industry, has improved and upgraded its YQW series, YQL series and YLW series thermal oil heaters applied in the chemical industry to meet the production demands of chemical enterprises. They are equipped with complete operation control and safety monitoring devices which can precisely control the working temperature to ensure boiler's safe operation. They are popular among and favored by chemical enterprises.
ZOZEN YQW series horizontal thermal oil heater adopts multi-loop coil structure with good safety performance and sufficient heating surface. Meanwhile, ZOZEN Boiler can also design the waste heat recovery system for users to ensure that boiler's thermal efficiency can reach 95% and above. What's more, automatic control system also ensures the safe and stable operation of thermal oil heater to realize the sustainable high-temperature and low-pressure heating supply. In addition, ZOZEN’s gas-fired thermal oil heater is equipped with advanced low-nitrogen burner to ensure that boiler's NOx emission is lower than 30mg/Nm3 to achieve the excellent performance in environmental protection.
ZOZEN WNS series gas-fired hot water boiler adopts packaged structure, which is convenient and quick for installation to save a lot of basic construction costs for the enterprise. Its internal structure adopts large-diameter waveform strove furnace which can effectively absorb heat expansion to add the radiation heating surface and ensue the low emission of NOx with the advanced low-nitrogen burner to improve the fuel utilization. What's more, its thread smoke tubes have scientific pitch and depth to further strengthen the convective heat transfer and make boiler's thermal efficiency reach 95% and above.
ZOZEN guides and cultivates different kinds of talents according to their different characteristics and laws of growth. In late July, ZOZEN Boiler launched a three-day job training program for new graduates, which was held by the vice general manager and boiler designer, Zhu Qiuping. As a senior boiler engineer, vice general manager Zhu has more than 30 years of experience in boiler design, especially in designing large-scale circulating fluidized bed boiler and gas-fired boiler. He is now the head in charge of ZOZEN Boiler's R&D and design department and is one of the representative persons of ZOZEN Boiler's "soft power".
Interested customers from Hubei province visit ZOZEN Boiler factory for field investigation and deputy general manager introduces the company profile of ZOZEN Boiler and advantages of SZS series gas-fired boiler. Its boiler proper adopts D-model structure. One side is furnace and the other side is convection heating surface. It also adopts membrane wall structure, foreign advanced burner, economizer and condenser at the end of flue gas duct, which can lower the exhaust gas temperature to 60 ℃, enhance the thermal efficiency to 98% and above, and reduce the emission of NOx to less than 30mg/Nm3. This equipment is featured by energy-saving, eco-friendly, safe, highly-efficient and easy to operate and maintain. Its automatic control system can also realize unattended operation.
Recently, ZOZEN delivered the thermal oil heaters for Hengfa Energy Saving Technology. As a leading industrial boiler manufacturer, the thermal oil heaters of ZOZEN have wide adaptability of fuels, are suit for natural gas, coal gas, marsh gas, diesel, light oil, etc. The heat exchange surface adopts three-pass round coil tube structure, which features more sufficient heating surface. The heaters are also equipped with the advanced burners to ensure the NOx emission is below 30mg/m3.
A boiler hydrostatic test is a way in which pressure vessels such as pipelines, plumbing, gas cylinders, boilers and fuel tanks can be tested for strength and leaks. The main purpose of the hydrostatic test is to identify the tightness and compressive strength of the pressure components of the boiler, including but not limited to welding lines, flange joints and tube expansion joints, and visually observe the deformation of the pressure components. Practice has proved that the boiler hydrostatic test can detect defects in boilers, and the corresponding measures can be taken accordingly. Therefore, it is an important step and means to ensure the safe operation of the boiler.
