Dealing with abnormalities in the circulating pump of a thermal oil heater involves several steps, aimed at identifying the issue and applying the appropriate corrective measures. Here’s a general approach:
1. Identify the Symptom: Common abnormalities include unusual noises, overheating, reduced flow rate, leakage, or vibration. Understanding the symptom helps in pinpointing the underlying issue.
2. Check Electrical Components: Inspect electrical connections, fuses, and the motor for an...
When a Circulating Fluidized Bed (CFB) boiler encounters a cyclone separator breakdown, it's important to address the issue promptly and effectively to maintain the boiler's efficiency and safety. Here are steps that should be taken:
Immediate Shutdown: First and foremost, shut down the boiler following the standard shutdown procedures. This is crucial to prevent any further damage to the boiler and to ensure safety.
Inspection and Diagnosis: Once the boiler is safely shut down, conduct a thor...
If the electric current of the circulating pump in a thermal oil heater is lower than the normal value, it may indicate a problem with the pump or the system. Here are some potential causes and solutions:
1. Low fluid level: If the thermal oil level is low, the pump may not be able to circulate the oil properly, leading to lower current readings. Check the fluid level and add more oil if necessary.
2. Clogged filter: A clogged filter can restrict the flow of thermal oil, causing the pump to wo...
Circulating fluidized bed boiler is a type of boiler that uses circulating fluidized bed technology to burn solid fuels. It has several advantages:
1. High efficiency and energy-saving: circulating fluidized bed boiler uses circulating bed technology, where the particle material in the bed forms a circulating flow, effectively improving the heat transfer efficiency. As a result, the thermal efficiency of the boiler can reach more than 85%, and the energy-saving effect is significant.
2. Good c...
The circulating pressure of a thermal oil boiler is generated by the driving of the circulating oil pump to the thermal oil circulation. Generally, the working pressure of the thermal oil pump is 4 ~ 8kg / cm2. Actually, the pressure of the thermal oil pump differs from different working conditions.
What are the factors that affect the maximum pressure of thermal oil heater?
1. Pressure of circulating hot oil pump
The pressure of liqu...
Circulating fluidized bed boiler is a kind of equipment with high efficiency and low pollution, and it has been widely used in power station, industry and other fields. Circulating ash is an important part of circulating fluidized bed boiler, which changes with the running state. So what are the functions of circulating ash of circulating fluidized bed boiler?
The role of circulating fluidized bed boiler circulating ash
The circulating ash in the circulating fluidized bed boiler consis...
Different combustion modes are the core difference between fluidized bed boiler and common boiler.
Fluidized bed boiler adopts fluidized combustion mode. After the fuel is crushed to a proper particle size by a crusher, it is fed from the upper part of the air distribution plate of the combustion chamber by a coal feeder, mixed with the hot boiling materials in the combustion chamber, heated rapidly, and the fuel quickly catches fire and burns. Under the action of high air velocity, a large num...
As a new mature high-efficiency and low-pollution clean coal technology, circulating fluidized bed combustion (CFBC) technology has many advantages that other combustion methods do not have. Circulating fluidized bed combustion is low-temperature combustion, so the NOx emission is much lower than that of pulverized coal furnace, only 200ppm.
