Proper shutdown procedures are crucial for ensuring the safe and efficient operation of a coal-fired steam boiler. The following steps should be followed when shutting down a coal-fired steam boiler:
1. Reduce the load: Before shutting down the boiler, the load should be reduced to its minimum level. This will help to prevent sudden drops in pressure and temperature, which could cause damage to the boiler and its components.
2. Shut off the fuel supply: The fuel supply to the boiler should be ...
Different boiler types have different weights. The traditional four-ton coal-fired horizontal boiler in China is about 25~30 tons.
ZOZEN Boiler has two series of coal-fired horizontal boilers, which are DZL series and SZL series. The DZL series with the capacity of 4 tons weighs 25 tons, and the SZL series with the capacity of 4 tons weighs 32 tons.
Please do not hesitate to contact us if any.
The ignition of industrial coal-fired boiler needs to be operated steps by steps, and the ignition operation is different according to the specific model of industrial coal-fired boiler. Grates of industrial coal-fired boilers are usually divided into manual grates and mechanical grates. Here, according to the different grates, the correct ignition steps of industrial coal-fired boilers are introduced in detail.
When we talk about CFBC in the area of industrial boiler, it usually means the circulating fluidized bed combustion. The circulating fluidized bed (CFB) is a type of fluidized bed combustion that utilizes a recirculating loop for even greater efficiency of combustion.
The efficiency of a coal-fired boiler depends on the loss of the boiler, the best efficiency in the boiler can be achieved if the losses are kept to the minimum. Since 50% of the losses are dependent on the fuel and ambient condition, the best efficiency can be achieved by properly tuning the other 50%, i.e. mainly carbon loss and dry gas loss.
The special spray gun for pulverized coal boilers is a kind of equipment that atomizes fuel oil (light oil, heavy oil, residual oil, etc.) to make the fuel oil into UM-level particles. Through air distribution and ignition, the fuel oil can be sufficiently burned. It is widely used in the boiler industry.
