When determining how much space should be between steam boilers, serviceability should be at the top of your mind. Sure, you want to save space, but you also want to make sure you have plenty of elbow room to service your boiler properly.
One of the most crucial factors that will determine how you space your boiler units is whether your boiler system is being installed in a new construction facility or an existing building that is being retrofitted.
While a new construction giv...
Oil Fired Boilers generally require Day Oil Tank to store oil and this oil is transported to a burner through oil piping and oil pump. On the other hand, High-Efficiency Gas Fired Boilers are exactly same as Oil Fired Boilers in construction and the only difference is the transportation of gas to burner requires gas train which comprises of the gas regulator that regulates pressure, the gas strainer to remover dirt from gas while no such valves are required in oil fired boilers.
1) The entire plant may be purchased as a complete package, only needing securing to basic foundations, and connecting to water, electricity, fuel and steam systems before commissioning. This means that installation costs are minimised.
2) This package arrangement also means that it is simple to relocate a packaged shell boiler.
3) A shell boiler contains a substantial amount of water at saturation temperature, and hence has a substantial amount of stored energy which can be called upon to cope with short term, rapidly applied loads.
*This can also be a disadvantage in that when the energy in the stored water is used, it may take some time before the reserve is built up again.
4)The construction of a shell boiler is generally straight forward, which means that maintenance is simple.
5)Shell boilers often have one furnace tube and burner. This means that control systems are fairly simple.
Although shell boilers may be designed and built to operate up to 27 bar, the majority operat
The combustion method of the boiler equipment is also a factor that the majority of users will consider when selecting the boiler. Depending on the combustion method, the boiler structure and boiler room layout will be different.
For an industrial boiler with reasonable structural design, its thermal efficiency is relatively high, and its exhaust gas discharge temperature is relatively low, so we must carefully consider the boiler property report form when purchasing the boiler.
Gas consumption per hour of natural gas boiler = boiler thermal efficiency / natural gas calorific value / boiler efficiency. The higher the efficiency of boiler use, the less gas consumption, which has inverse relationship between the two. Boiler efficiency has become a key point in assessing boiler quality.
The oil-fired boiler refers to the boiler fueled by oil, including the diesel, waste oil and other fuel oil. The oil consumption of the oil-fired boiler affects the economic operation of the boiler.
Boiler is a piece of equipment with large energy consumption. Therefore, both boiler manufacturers and purchasers regard energy conservation as an important indicator of boiler performance. The daily energy-saving measures of the natural gas fired boiler are mainly as follows.
