(Question details) specific performance:The gas boiler is powered on, press start, the motor does not turn. Answer: Fault reason:1. Insufficient pneumatic locking.2. The solenoid valve is not sealing, and there is air leakage at the joint. Check the lock.3. The thermal relay is open.4. At least one of the conditional circuits is not valid (water level, pressure, temperature and to check whether the program controller is energized to start). Troubleshooting:1. Adjust the air pressure to the requested value.2. Clean or repair solenoid valve pipe joint.3. Check whether the component is damaged and motor current by reset.4. Check whether the water level, pressure and temperature exceed the limit.ZOZEN gas-fired boiler adopts automatic control to control the operation, combustion, water level, temperature and steam pressure. In case of such problems, the system will automatically prompt the error code.
There are several ways to estimate the thermal efficiency of gas-fired boilers:
1. Direct method: This method involves measuring the amount of fuel consumed and the amount of heat produced by the boiler. By comparing these two values, it is possible to calculate the thermal efficiency of the boiler.
2. Indirect method: The indirect method involves measuring various parameters such as flue gas temperature, ambient air temperature, and fuel consumption, and then calculating the t...
An Interlock in the boiler’s control system is a programmed or hardwired condition that forces a device to be in a pre-determined or permissive state before the process can continue.
Depending on design pressure, fuel type, either liquid, gas or solid, all steam boiler require interlocks to sequence the operation and to prevent damage to the boiler. Examples of such devices are High or Low Boiler Drum Water Level, Low Boiler Feed Pump Pressure, High or Low Fuel pressure, High or Low Atomization pressure (oil fired), Proof of Ignition, Proof of Flame, FD and/or ID (solid fuel) Fan Motor Operation or combustion air pressure, Damper or Valve position and High Boiler Steam Pressure as well as O2 and furnace temperature.
Liquid fuels mainly include petroleum, gas oil, kerosene, heavy oil, coal tar, gasoline, alcohol and so on. The liquid fuel is mainly composed of seven components: carbon (C), hydrogen (H), oxygen (O), nitrogen (N), sulfur (S), ash (A) and moisture (M). It is characterized by high content of carbon and hydrogen and low moisture, so its calorific value is very high, usually 40600〜43100kJ/kg.
The advantages of boiler fueled by the methanol can be concluded as follows:
a. The emission from boiler fueled by the methanol is very environmentally friendly, without sulfur, particulate matter, heavy metals and polycyclic aromatic hydrocarbons.
b. The methanol fuel is quite cost-effective.
c. The operation of boiler fueled by the methanol is safety. Compared with compressed natural gas, liquefied petroleum gas, gasoline and diesel fuel, methanol has the char...
Power boilers take the chemical energy stored in fuel, convert it to heat energy in the combustion process, and transfer that heat energy to water to produce steam. The transfer of energy from combustion gases to the water and steam is called heat transfer.
When it refers to how to reduce the procurement cost of industrial boilers, many corporate users will be first to take measures to effectively reduce the related costs involved in the boiler procurement process, such as the boiler equipment cost, transportation cost, loading and unloading cost, insurance cost, installation and commissioning cost, labor cost, acceptance and inspection cost.
People assume that owning a biomass boiler is no different from owning its less environmentally friendly cousins, the oil and gas boilers. Nothing could be further from the truth, and it is this very misconception which leads to abuse and neglect of the maintenance that a biomass boiler needs, if it is to retain its environmental and economic saving potential. This is especially true given the tendency of many installers to skimp on providing the proper support services and education to their customers.
