The primary use of steam boiler in tire manufacturing is the vulcanizing process — the curing of the rubber needs steam to provide heat energy. Curing is a process in which chemical or physical action takes place for harder, tougher and more stable linkage.
As we know tires are the most important part of our vehicle because in all the parts of vehicle tires only remain in contact with the earth hence tires carry all the load of vehicle and passengers.
Vulcanization is a p...
Combustion is a process which needs constant air supply for its survival, but as we move up the earth i.e. at higher altitudes, things aren’t the same as they used to be at sea level. Due to decreased air density at higher altitude, it will consume the same volume of air but will not consume the same mass of air.
This results in less fuel consumption & less steam generation rate. Due to the reduction of mass flow of gases through tubes of a steam boiler, convective heat transf...
Today, there are two main types of green boilers used in different industries: biomass boilers and condensing boilers. Each of these operates in completely different ways to reduce your carbon footprint.
Biomass Boilers
Biomass boilers operate by burning wood and other renewable organic materials to produce heat. There are automatic biomass boilers that control the amount of air and fuel that is used, making them even more efficient. To keep this boiler running, owners will need ample ...
Steam is very widely applied in the textile industry. It is commonly used in many subsectors and processes: manufacturing fabrics, manufacturing textile products…
A boiler economizer (also known as an economizer) are mechanical devices intended to reduce energy consumption or perform a useful function such as preheating a fluid. A boiler economizer is essentially a heat exchanger that makes a system more energy efficient by taking enthalpy in fluid streams that are hot, but not hot enough to be used in a boiler – hence recovering more useful enthalpy and improving the steam boiler’s efficiency.
Steam boilers use a contained heat system to generate steam. The steam travels through pipes in the building’s walls where they emerge at radiators in heating systems. The radiators warm from the steam’s heat. As the steam gives off its heat, it condenses back to liquid water and returns to the tank. A boiler system of this type that does not allow outside water sources is a closed system and is highly efficient for using all the condensed water. An open network may be required in operations where the steam or water gets contaminated in such a way that it cannot return to the boiler for reuse.
Low-pressure boilers operate at a lower pressure and reach lower temperatures than high-pressure steam boilers. Water in low-pressure boilers is not heated beyond 250ºF, and the steam pressure does not exceed 15 psi (pounds per square inch).
