In order to improve the combustion efficiency of the boiler, in a large boiler, the combustion air is not supplied all at once, but is supplied in two times, one is supplied with the fuel that controls the rate of combustion as well as the amount of fuel that can be burned,and the other is directly supplied to the combustion process that that improves combustion efficiency. The primary air rate of the boiler refers to the proportion of the primary air. If the total air volume is 100% and the primary air rate is 70%, the secondary air rate is 30%.
The slag produced by a biomass-fired boiler can be reused to avoid energy waste and environmental pollution. There are many ways to reuse the slag. For example, the slag can be used to improve soil and improve soil performance. If it contains potassium carbonate and organic matter, it can also be used to produce compound fertilizers. In addition, the slag is a kind of plant ash, it is also a good thermal insulation material for steelmaking.
Discharging high-temperature flue gas generated by a biomass-fired boiler efficiently and safely is crucial for boiler operation, environmental compliance, and energy recovery. These gases, if not handled properly, can lead to energy inefficiency and increase the emission of pollutants. ZOZEN Boiler, as a professional industrial boiler manufacturer, incorporates advanced technologies and strategies to manage and utilize high-temperature flue gases from biomass-fired boilers. Here's an overview o...
The impact of fuel on boiler performance is significant and multifaceted, affecting everything from efficiency and operating costs to maintenance requirements and environmental emissions. As a professional industrial boiler manufacturer, ZOZEN Boiler emphasizes the critical role that fuel quality and type play in the operational efficacy, longevity, and sustainability of boiler systems. Here's an overview of how fuel impacts boiler performance:
1. Efficiency and Heat ValueThe type and quality o...
According to the Wikipedia, fuel oil (also known as heavy oil, marine fuel, bunker, furnace oil, or gasoil) is a fraction obtained from petroleum distillation. It includes distillates - the lighter fractions, and residues - the heavier fractions.
The term fuel oil generally includes any liquid fuel that is burned in a furnace or boiler to generate heat, or used in an engine to generate power.
From wood burning to pellet-firing biomass, alternative fuel boilers and solid fuel fired boilers offer environmentally friendly energy options and cost efficiencies. With the push to become less reliant on fossil fuels, alternative fuel boilers provide a way for plant managers to save money on fuel sources as well as meet tightening emission regulation standards.
1. If the stop valve of the oil circuit is closed or the feeding of oil is insufficient and the oil filter is blocked, it is necessary to check that the valve in the oil circuit is open, the oil filter works normally and clean the filter screen of the pump.
2. If the oil temperature is low, viscosity is too high or the temperature of the oil fed by pump is too high, the oil temperature needs to be increased or decreased.
3. If the the domestic sewage treatment equipment oil pump breaks down, the oil pump is required to be replaced.
4. If the bearing of fan motor is damaged, it is necessary to replace the motor or bearing.
5. If the fan impeller is too dirty, it is required to be cleaned.
