Using artificially softened water in the heating circuit with your boiler can potentially cause issues and is not recommended.
Artificially softened water contains high levels of sodium ions, which can cause corrosion of the boiler and other components in the heating system. This corrosion can damage the boiler and other components, leading to leaks and reduced efficiency.
In addition, artificially softened water can cause problems with water pressure and flow rate, which can i...
If the electric current of the circulating pump in a thermal oil heater is lower than the normal value, it may indicate a problem with the pump or the system. Here are some potential causes and solutions:
1. Low fluid level: If the thermal oil level is low, the pump may not be able to circulate the oil properly, leading to lower current readings. Check the fluid level and add more oil if necessary.
2. Clogged filter: A clogged filter can restrict the flow of thermal oil, causing the pump to wo...
When the boiler flue gas is saturated wet flue gas, the flue gas contains a large amount of water vapor. At this time, if the flue gas is directly discharged from the chimney and enters the low-temperature ambient air, and the saturated humidity of the ambient air is relatively low, the water vapor in the flue gas will condense to form wet plumes, which is often called "white smoke".
The water in the flue gas of the boiler is produced during the combustion of the hydrogen element of hyd...
Boiler environmental factors are an important aspect of managing boiler control safety, and users need to correctly identify boiler environmental factors. The environmental factors of different boiler rooms are different. Here we mainly introduce the environmental factors of gas boilers.
Gas boiler environmental factors
1, Lighting lamps, short-circuit, leakage cause fire, discarded
2, Burn the boiler, which produces harmful gases
3, Sanitary cleaning, waste cleaning tools, garbage
4, Boile...
Boiler is a kind of equipment that uses the heat energy released by fuel combustion to heat the working medium to a certain parameter (temperature and pressure), which is widely used. According to different classification standards, there are many kinds of boilers. Many users doubt about what a gas-fired heating medium boiler is. Here, ZOZEN Boiler will introduce the gas-fired heating medium boiler for you.
Gas-fired heating medium boiler, that is, gas-fired boiler, refers to a heating boiler t...
As their name implies, hot water boilers operate by being completely filled with hot water. On the other hand, steam boilers are usually only filled approximately 3/4th of the way full, while the top quarter is reserved for steam.
Boilers are often distinguished by fuels that power them. The kind of fuel makes an essential difference in operating costs and environmental impact, so it’s important to learn about the various types of boiler fuel.
Coal, is a common boiler fuel. It dominates the global energy arena due to its abundance, affordability and wide distribution across the world. The most commonly used coal fuels include anthracite, bituminous coal, sub-bituminous coal, lignite and peat.
Safety is always a top priority when working with industrial boilers, at least it should be. Fortunately, safety has become less of an issue with more modern water tube boilers. Compared to traditional fire tube boilers, water tube boilers are far safer, almost to the point where you don’t have to worry about a catastrophic explosion taking place.
