When it is found that the boiler steam pressure can't rise, the first thing we should do is to check whether the water pump of the gas-fired steam boiler works and how much the pressure of the water pump of the gas-fired steam boiler can reach. When installing the water pump of the gas-fired steam boiler, a pressure gauge is installed on the water pump. This is because, if the gas-fired steam boiler does not add water, it can be detected whether it is caused by the water pump.
As a kind of special equipment, the safe operation of industrial boilers is the key point that every enterprise may pay attention to. Today, let’s talk about the normal water level in boiler operation.
During the normal operation, the steam drum water level maintains 0mm, and the allowable fluctuation range is ±30mm, with the maximum not exceeding ±50mm.
Manually close the fuel supply valve, stop the combustion, purge after the program enters, until the end of the purge, stop the program such as burning heavy oil, and enter the line sweeping stage before stopping the combustion, and purge with steam or light oil pipe; Generally, steam purging is used when stopping for a long time.
The installation contents of boiler body pipeline are as follows:
1) Connection between water supply console and economizer header;
2) Connection between economizer and inlet pipe from economizer outlet to drum;
3) Connection between the main pipe and branch pipe of the drum drop and each lower header of the water wall;
4) Connection of steam guide pipe between each water wall header and steam drum;
5) Connection of superheated steam pipe between outlet header of low-temperature superheater...
Boiler water circulation refers to the circulating flow of water and steam-water mixture on the evaporating heating surface of boiler. What is the working principle of the latest water circulation system of boiler?
Hot-water boiler is a kind of thermal equipment that uses the heat energy released by fuel combustion or other heat energy (such as electric energy, solar energy, etc.) to heat water to the rated temperature. According to different fuels, hot water boilers can be divided into gas-fired hot water boilers, oil-fired hot water boilers, biomass-fired hot water boilers, and coal-fired hot water boilers. How to choose hot water boiler? We will focus on the heating, pressure and thermal efficiency of hot water boiler.
In the process of the development of national economy, the importance of boilers is self-evident. The so-called boiler is a device that uses the heat energy released by fuel incineration to heat water or other media, so as to obtain steam, hot water or other media with specific parameters (temperature and pressure).
Ash accumulation on the heating surface.
The scaling and ash deposition on the water-cooled wall of the furnace and the ash deposition of the superheater, convention tube bundles, economizer and preheater can increase the thermal resistance of the flue gas, weaken the heat transfer, lessen the cooling effect of the flue gas and increase the exhaust gas temperature of the gas-fired boiler.
Too high excess air coefficient.
Under normal circumstances, as the furnace outlet excess...
