The rubber production of the outer layer of the wire and cable must undergo a vulcanization process, and the vulcanization process need the steam from boilers to heat and pressure the rubber. Anhui Cable is an enterprise specializing in the production of wire and cable. It mainly produces and operates 1E class K2, K3 and non-1E medium voltage power cables, various types of flame retardant and refractory special cables. In 2015, the principal of Anhui Cable purchased a 4-ton SZS Condensing Gas Fired Boiler in Zozen Boiler to provide steam for rubber vulcanization. The steam temperature was required to be between 140-180℃. After vulcanization, the natural cooling was performed, opened the valve, the steam condensate in the pipeline will go directly into the cooling pool. After steam cooling, fresh water can be added to the processed of drawing, annealing, ,water sealing, extruding, extruding rubber, mixed rubber, desulfurization and dust removal, which saves a lot of production water for
Shandong Luhua Group Co., Ltd. is a large-scale private enterprise and a key leading enterprise of agricultural industrialization. It has 24 production bases and spans industries such as edible oil, condiments and vegetable processing. The annual production capacity of edible oil is 1 million tons, and the annual production capacity of condiments is 100,000 tons.
ZOZEN boiler Technical Team has customized various models and parameters of thermal oil heater according to the actual conditions of Fuxin Oil Plant. The person in charge of the project said that a total of YQW-14000Q, two YQL-105000Q and one YQW-4200Q thermal oil heater have been installed in the boiler room of the Fuxin Oil Plant of Luhua Group. Their rated thermal power is 12 million kcal, 900,000 kcal, 3.6 million kcal, which meet the edible oil processing drying / cooling - hot air frying - suction cooling - rolling crushing / peeling - steaming and other cumbersome production processes.
The thermal oil heater
Chengrun Petrochemical is located in Jiangyin City, Jiangsu Province and specializes in the refinement, production, and reconciliation of base and regular line oil materials. For a long time, refineries prefer to use thermal oil heater to preheat the cold materials. Thermal oil heater are widely used for the heating of solvent and extractant evaporation devices in the manufacture of lubricants. Chengrun Petrochemical has customized a 5-million kcal horizontal gas-fired thermal oil heater (YY(Q)W-6000Q) to upgrade technology and expand capacity in the project of creating lubricants and fuel oil.
The thermal oil heater is a new type of special boiler with low-pressure and high-temperature working characteristics. Its liquid-phase boiler can reach an oil temperature of 350° C, and gas-phase boilers can reach a gas temperature of 450° C. Anybody who needs to heat evenly and steadily and does not allow direct flame heating can use thermal oil heater for heating. At the time of th
The development of technology and the progress of skill require the diversification of the quality of the sodium sulfide. Enterprises must produce different types of sodium sulfide according to different users. Taihua Industry is high-tech chemical enterprise. Its main products are pure benzene, toluene, p-tert-butyl benzoic acid, industrial sodium sulfide, anhydrous crystalline sodium sulfide and nine-hydrate crystalline sodium sulfide. The production of sodium sulfide requires high temperature and stable steam. Therefore, Taihua Industry has conducted an inspection of the same industry manufacturers and combined with actual conditions of the unit to transform the caustic soda production system in the evaporation section. At first, Taihua purchased a 2.4 million thermal oil heater at ZOZEN(YY(Q)W-2800Q) to improve utilization rate of heat energy. Later, in order to increase the coal utilization rate, Taihua purchased a 2.4million kcal thermal oil heater(YLL-2800MA(w)) at ZOZEN
Wuxi kanglong Rubber Products Co. Ltd produces rubber and latex products including gloves etc.. During rubber material manufacture, vulcanization needs heating under 190-220°C, and finally create rubber. if by using steam boiler, the corresponding steam pressure is at least 2.5MPa, this boiler will be much more expensive and the whole system will be more expensive and high request. So thermal oil heater has unique advantage in rubber plant. It can reach high temperature under normal pressure; boiler construction cost is lower than steam boiler. Also, oil transfer heat more stable, it guarantees product can reach accurate temperature, which make process more accurately running. This heater has compact body, it is transport as a whole body, easy to operate. After visiting and technical discussing, customer chose ZOZEN thermal oil heater.
