Coking and dust accumulation on heating surface. Whether it is slagging and ash deposition on the water wall of the furnace or ash deposition on the superheater, convection tube bundle, economizer and preheater, the measured thermal resistance of flue gas will increase, and the deterioration of heat transfer will worsen the cooling effect of flue gas, resulting in an increase in the temperature of boiler waste gas.
As an effective tool in the era of environmental protection, gas-fired boilers are favored by all walks of life and widely used in food, paper, building materials, wine, chemical industry and other industries. With the increasing use of gas-fired boilers, there are more and more problems.
Make-up water rate refers to the proportion of treated water added to the boilers, steam turbine equipment and its thermal systems and participating in the circulation of steam-water systems in the boiler steam volume in the calculation period.
Strictly control the operating pressure of the environmental thermal oil heater, and do not exceed the specified range. Once there is a trend of exceeding the specified upper limit, immediate measures should be taken.
The environmental thermal oil heater has the characteristics of high temperature and low pressure, which can work under lower pressure and produce high temperature.
The environmental thermal oil heater refers to a boiler heated by heat transfer oil. Heat transfer oil, also known as organic heat carrier, has been used as an intermediate heat transfer medium in industrial heat exchange for more than 50 years.
All boiler pipes have been installed and passed the hydrostatic test.
The furnace wall masonry and insulation work have all ended and has been qualified.
The flue gas duct has been installed and insulated, and the induced draft fan has been installed and debugged to be qualified and can be put into operation.
All the thermal and electrical instruments required for boiler drying have been installed and verified to be qualified.
Mortar samples have been placed on both sides of the middle par...
As an important heat energy supply equipment, industrial boiler is widely used in food, electronics, paper making, building materials, textiles and chemical industries. According to the medium, industrial boilers can be divided into steam boilers, hot water boilers and thermal oil heaters. In order to solve the problem "How many tons are the rated thermal power of 42 MW of industrial boiler?" First of all, we need to know the basic knowledge of rated thermal power and unit ton.
