The slugging for the circulating fluidized bed boiler means that the bubbles in the feed layer converge and grow. When the diameter of the bubbles grows close to the cross section of the bed, the feed layer is divided into several sections to be particle layers with intervals of bubble sections. The particle layers are pushed by bubbles to move upwards to a certain height and then they burst into a large number of small particles that are thrown out of the bed and carried away by bubbles, while the large particles fall down like rain.
The coal is usually smashed to be the pulverized coal for boiler combustion. This is an introduction to the causes and treatment methods for the extinguishment of the pulverized coal fired boiler.
When using the industrial gas-fired boilers, daily boiler operation and management should be paid attention to ensure the safe and stable boiler operation, so as to guarantee the daily production of workshop.
In the boiler operation,the flue gas discharged from the flue gas duct has a certain temperature. However, the abnormal increase of flue gas temperature in boiler's flue gas duct is usually accompanied with other abnormal phenomena. In this regard, corresponding measures should be taken for adjustment based on the reason analysis.
1) Set up the air preheater. One of the most effective measures to improve the thermal efficiency of thermal oil heater is to use an air preheater for heat recovery. 2) Use waste heat boiler for heat recovery. The waste heat boiler uses the waste heat in the flue gas exhausted from the thermal oil heater to heat water or generate steam.
Once the flameout of gas-fired or oil-fired boiler is confirmed, the boiler should be shut down for inspection and maintenance in time according to the operating regulations. Only after the inspection and test are completed, the boiler can continue to be used.
From the perspective of atomization mode, there are three kinds of burner used by boiler that are rotating cup atomization burner, pressure atomization burner and medium atomization burner.
There are many skill indicators involved in the operation of oil-fired boiler, some of which are variables. We must master the relationship between variables and working effect of oil-fired boiler to realize better regulation.
