Proper shutdown procedures are crucial for ensuring the safe and efficient operation of a coal-fired steam boiler. The following steps should be followed when shutting down a coal-fired steam boiler:
1. Reduce the load: Before shutting down the boiler, the load should be reduced to its minimum level. This will help to prevent sudden drops in pressure and temperature, which could cause damage to the boiler and its components.
2. Shut off the fuel supply: The fuel supply to the boiler should be ...
High exhaust temperature in a biomass-fired boiler can be caused by several factors, including:
1. Insufficient air supply: If there is not enough air supplied to the combustion chamber, the fuel may not burn completely, resulting in high exhaust temperatures.
2. Excessive fuel supply: Excessive fuel supply can overload the boiler, causing incomplete combustion and high exhaust temperatures.
3. Improper combustion: Improper combustion can lead to incomplete fuel burning and high exhaust tempe...
A biomass-fired boiler furnace that has multiple issues such as wall cracks, deformation, coking, and tilt, loose bricks, tube wall blockage, burned-out rock wool sealing, and combustion chamber wall damage requires immediate attention to prevent further damage and potential safety hazards.
Firstly, it is recommended to shut down the boiler immediately to prevent any further damage and ensure the safety of the surrounding area. The boiler should not be restarted until all necessary repa...
Regular maintenance is essential to ensure safe and efficient operation of industrial thermal oil heaters. Here are some of the key maintenance tasks that should be performed:
1. Daily checks: The operator should perform daily checks of the heater, including checking the fuel level, the temperature of the thermal oil, and the pressure of the system.
2. Cleaning: The heater should be cleaned regularly to remove any buildup of soot, ash, or other debris that can reduce efficiency or cause damage...
Industrial steam boilers can produce noise for several reasons, including:
1. Combustion noise: Combustion noise is caused by the sound of the flames as they burn the fuel. This noise is typically louder during startup and shutdown, and can be reduced by optimizing the combustion process.
2. Boiler fan noise: Boiler fans are used to supply combustion air and to exhaust flue gases. The noise generated by the boiler fan can be reduced by installing a silencer or adjusting the fan speed.
3. Wate...
Boiler economizers are devices that help to improve the efficiency of industrial boilers by recovering heat from the flue gas and transferring it to the boiler feedwater. In this article, we will explore how boiler economizers work and the benefits they offer. We will also introduce ZOZEN's boiler and economizer solutions that can help improve the energy efficiency of your industrial operations.
How Do Boiler Economizers Work?
A boiler economizer is essentially a heat exchanger that recovers w...
When it comes to coal fired boilers, the rear arch plays a critical role in the combustion process. The main function of the rear arch is to keep the fuel particles in suspension and prevent them from falling into the ash hopper, which can lead to incomplete combustion and decreased efficiency.
At ZOZEN, we understand the importance of a well-designed rear arch for coal fired boilers. That's why our coal fired boilers are equipped with advanced rear arch designs that enhance the combust...
Oil-fired hot water boilers are hot water equipment that is widely used in industrial and civil fields. However, sometimes during use, oil-fired hot water boilers may emit a large amount of white smoke. What is the cause of this?
Firstly, the reason for the oil-fired hot water boiler emitting a large amount of white smoke may be incomplete combustion of the boiler. This may be due to insufficient oil supply, poor oil quality, excessive deposits inside the combustion chamber, and other i...
