Commonly used preparations in the pharmaceutical industry include tablets, pills, powders, injections, tinctures, solutions, extracts, ointments, etc. The main processes include disinfection, rough washing, fine washing, drying, cooling, preparation, granulation, tableting and coating etc. The process requires high-temperature sterilization to raw materials, equipment by a large amount of industrial pure steam, and heat is supplied for drying, cooling and tableting granulation processes.
According to the experience from working with many pharmaceutical preparation manufacturers, Pharmaceutical plants has different using of boilers, and the running time varies. Some equipment operates 24 hours per day, 365 days per year. Some devices need to run at regular intervals. The requirements for the steam system are very high. ZOZEN can customize the complete boiler system for the manufacturing industry to meet the different needs of users.
Centralized heating is a heating method refers to the construction of a centralized heat source in industrial production areas and areas where urban residents gather and provides heat to enterprises and residents in this area. Common centralized heating modes include co-generation, regional coal-fired boilers, and gas boilers. The working principle of boiler heating is that water enters the boiler, after heating then s sent to the indoor radiator through the circulating water pump and provide heat by radiator. The water is returned to the inside of the boiler for heating, and then flows back into the radiator and circulates like that.
The water heating boiler provided by ZOZEN can heat 10,000 square meters with 0.7MW boiler which runs efficiently and saving a lot of fuel costs for users.
As the fast developing of chemical industry, there are many kinds of rubber product with similar producing process, mainly including: raw material preparing, Plastic refining, mixing, calendering, forming, vulcanizing etc., and most of these sections needs steam. Besides, some high temperature machines such as pressing, kneading, banbury machines, vulcanization molding, injection molding machine, cement mixer, conveyor belt dryer and molds heating and insulation also need thermal oil heater.
The main production units of refineries usually include: crude oil distillation (normal, vacuum distillation), thermal cracking, catalytic cracking, hydrocracking, petroleum coking, catalytic reforming, refinery gas processing, petroleum product refining, etc. Steam boilers and heat transfer oil boilers are important equipment often used in the production of light oil refining industry. They are an indispensable source of heat and power in the production process of refineries. They are not only used in petrochemical production processes, but also in heating oil and increasing fluidity. Generally, heat is supplied in the steps of vacuum distillation, vacuum distillation, and coking deep processing of crude oil in refined oil refining.
ZOZEN boiler serves many refineries around the world and has many years of experience in the industry. Due to the special characters of the boilers used by chemical companies, the technicians of ZOZEN will customize the technical solutions to meet the pro
