What are the precautions for the safe use of gas-fired boilers?

1. Standard setting, most gas-fired boilers are operated by PLC control system. For this reason, the boiler should be operated according to the factory instructions when setting, so that the boiler can work within the scope of compliance with the requirements.

2. Water level and water quality, check whether the boiler water supply facilities are normal, whether the boiler water level meets the requirements, and also check whether the water quality meets the standard, and do a good job of deoxidation.

3. Fuel supply, the gas pipeline is kept unblocked, and the burner is ignited normally.

4. In the cleanup work, it is necessary to do a good job in the daily boiler sewage discharge, and it is better to adopt frequent, less and balanced discharges.

5. Boiler shutdown maintenance. If the factory needs to be shut down for a long time for some reasons, maintenance work should be done after the boiler is shut down, such as pressure maintenance, wet maintenance, dry maintenance and aeration maintenance.

In addition, the user should use a certified boiler operator; keep the boiler room clean, do not stack debris, etc., and at the same time, the fire source should be controlled, and flammable and explosive materials should be prohibited; the boiler should be checked for abnormal noise during operation, and if necessary Stop the boiler for inspection and maintenance to avoid accidents; in addition to the data statistics of the boiler's own control system, the daily boiler maintenance should also be recorded.

With more than 30 years of experiences, the high-quality products produced by ZOZEN Boiler sell well at home and abroad, covering tobacco, rubber, food, paper, medicine, electronics, heating and other industries. ZOZEN gas boiler SZS series and WNS series, the capacity covers 1-130t/h and the pressure is 0.7-5.3MPa.