24 kw thermal oil heater, ZOZEN industrial steam boilers has sufficient steam output

The primary purpose of the boiler is to supply energy to the facility's operations – for comfort heating, manufacturing process, laundry, kitchen, etc. The nature of the facility's operation will dictate whether a steam or hot water boiler should be used. Hot water is commonly used in heating applications. Under these conditions, there is a wide range of ZOZEN hot water boiler products available.

The after-sales service of boilers is the issues that users are very concerned about. ZOZEN is fully aware that in the current time when the homogenization of boiler products is serious, after-sales service is the core competitiveness to effectively open the gap between various boiler manufacturers. In the face of every problem encountered in the use of users' boilers,ZOZEN will regard it as their own responsibility, establish a comprehensive after-sales mechanism, responds quickly, and effectively solve problems for users, 24 kw thermal oil heater.

ZOZEN molten salt heaters use molten potassium nitrate and sodium nitrite as heating media. Molten salt heater will heat the powder salt over the melting point until the viscosity of the molten salt allows circulating pump works, after the whole system is under circulating condition, then feed then into the thermal fluid heater for further circulating rising temperature to make it to be recycling used. Normal media working temperature is 400-550℃, top working temperature could reach 600℃.

The process of dyeing, drying, pressing, sizing, printing and dyeing, shaping and other processes in the textile industry are supported by the steam generated from industrial boilers. SOORTY is one of the largest denim manufacturers in Pakistan. ZOZEN left a deep impression on SOORTY with its energy-efficient steam boiler system solution, and provided the company with one set of 10 tph SZL series coal-fired steam boiler. 

Scaling, abrasion, burning front arch and feeding hopper are common problems of biomass-fired boilers, ZOZEN increased height of furnace, fastening the speed of stoker, input ash blowing unit at convection area, and automatic ash cleaning system at the bottom of stoker, so the above problems are all solved, it reduced much maintaining personnel’s work. Advantages: Make biomass-fired boiler a clean and neat working environment.

In order to ensure the accurate air distribution of biomass fired boilers, the production department of ZOZEN pays great attention to the first step in boiler manufacturing. The steel plate is cut by American Pegasus underwater plasma cutting, whose processing accuracy can be controlled within 1 mm, 24 kw thermal oil heater.

24 kw thermal oil heater, ZOZEN has proved its competitive advantage with its high product quality. In the future, ZOZEN will spend more time and energy on the innovation of gas-fired boilers, and capture more market share.