boiler 2.5 ton convert cubic meter natural gas, ZOZEN boiler painstakingly pursues boiler quality and service

As a leading manufacturer of industrial boilers, ZOZEN has a network of sales around the world. Recently, ZOZEN mid-temperature and mid-pressure steam boiler project in Bangladesh was in full swing, boiler 2.5 ton convert cubic meter natural gas.

The after-sales service of boilers is the issues that users are very concerned about. ZOZEN is fully aware that in the current time when the homogenization of boiler products is serious, after-sales service is the core competitiveness to effectively open the gap between various boiler manufacturers. In the face of every problem encountered in the use of users' boilers,ZOZEN will regard it as their own responsibility, establish a comprehensive after-sales mechanism, responds quickly, and effectively solve problems for users, boiler 2.5 ton convert cubic meter natural gas.

ZOZEN SHL series boiler is the bulk industrial boiler with dual boiler cylinders and transverse arranged, as well as the natural cycling coal combustion water pipe boiler. The transverse upper and lower boiler cylinders and water cooling walls together form the silo type furnace, together with convection pipe bundle and collection chest to form the boiler body frame.

ZOZEN skid mounted boiler has advantages of high-pressure steam, low-pressure installation, fully automatic and safe operation

With thermal efficiency over 82% and NOx emissions less than 100mg/Nm3, ZOZEN DZL series boilers feature high efficiency and low emissions. They adopt single-drum structure and a chain grate. The heat transfer coefficient of threaded smoke tubes is 1.8 times higher than ordinary tubes. In order to expand the capacity, PT. New Hope Indonesia introduced ZOZEN DZL series coal-fired steam boiler to provide efficient and reliable heat source guarantee for feed production. 

ZOZEN SZS series boiler body is designed with D-type chamber combustion structure. The furnace is on right side and the convection heating surface is on left side. The membrane type structure is adopted for the circumference of the furnace body, the wall between the furnace and the convection zone, the front and rear walls of boilers body. The furnace pressure is designed to be greater than 6000Pa.

During the production process, the CNC cutting rate of ZOZEN has reached more than 80%, which provides a strong guarantee for the welding and assembly quality of the boiler. Compared with flame cutting, the underwater plasma cutting used by ZOZEN has no deformation and splashing, which further improves the assembly accuracy between the components of the boiler, thereby achieving accurate assembly of the entire boiler.

Be it a firetube, watertube, hot water, or steam boiler, they are all effective and efficient in their own unique ways. To learn in more detail about the differences between boiler types, visit the section on ZOZEN website.