60 mw boiler steam for pltu plant 11, ZOZEN shows the schematic diagram of WNS series gas-fired three-pass steam boiler

ZOZEN announced the partnership with Libbey Inc., the global glassware industry giant, on the low NOx gas-fired boilers. As an industrial boiler manufacturer with more than 30 years of history, ZOZEN shares the same development concepts with Libby. The two sides became friendly and trustworthy partners to improve the atmospheric environment.

The function of CFB boiler secondary air: Ensuring that the combustibles overflowing from the dense phase zone will be further oxygen-enriched in the lean phase zone (suspension section), so that the fuel is fully burned in the furnace and the temperature difference between the upper and lower furnace reduces.

ZOZEN service engineer inspected each boiler parts

In September, ZOZEN SZL series biomass-fired boiler provided for Inner Mongolia Jinshan Mining had been debugged and put into operation smoothly. The boiler has a higher furnace and reasonable grate rotate speed to ensure the sufficient fuel combustion and improve the thermal efficiency to 88% and above. At the same time, the boiler convention area is also equipped with an ash removal device independently developed by ZOZEN which not only has good tightness, but also greatly reduces the workload of the boiler operation and maintenance personnel, so as to help Jinshan Mining achieve clean production and build a green mine.

Increase stoker availability of stoker, guarantee boiler safely running. ZOZEN biomass-fired fuel has another character, which is high volatility and low ash content. After combustion, there is almost no ash left on the stoker, so stoker should adopt proper high temperature resistance material to work under high temperature radiation, 60 mw boiler steam for pltu plant 11.

During the production process, the CNC cutting rate of ZOZEN has reached more than 80%, which provides a strong guarantee for the welding and assembly quality of the boiler. Compared with flame cutting, the underwater plasma cutting used by ZOZEN has no deformation and splashing, which further improves the assembly accuracy between the components of the boiler, thereby achieving accurate assembly of the entire boiler, 60 mw boiler steam for pltu plant 11.

It’s critically important to stay in lock step with your customers to understand how products need to evolve to continue to meet their needs. It’s easy to fall into the behavior of “milking” existing products. Products must continually evolve to remain relevant and useful. The path to success is through continual product innovation. It is the ZOZEN Boiler way, 60 mw boiler steam for pltu plant 11.