oil fired boiler for pharmaceutical industry, ZOZEN boiler provides high quality and high standard experience for feed industry

oil fired boiler for pharmaceutical industry, 2020 is the start year of the construction of ZOZEN Boiler’s lean factory. As one of the key tasks of this year, based on the successful application of MES (manufacturing enterprise production process execution management system) informatization, ZOZEN Boiler will adhere to the lean management concept to build the digital lean factory, and implement the standardization of operation and workflow in every process of production and operation.

ZOZEN YLW series thermal oil heater is a kind of horizontal square-coil chain grate boiler. It is pre-assembled, so the chain grate and boiler proper are separated for shipment. The boiler adopts the chain grate for mechanical coal feeding, the forced and induced draft fans for mechanical ventilation and the slag discharger for mechanical slag discharge. During operation, the fuel falls from the coal hopper onto the grate for combustion. The high-temperature flue gas is reflected from the back arch to the front of the furnace and enters the furnace. After the radiant heat exchange, it enters the convective heating surface for convective heat exchange and then goes to the waste heat boiler, air preheater and dust collector. Finally, the flue gas is drawn by the induced draft fan through the chimney and is discharged into the atmosphere, oil fired boiler for pharmaceutical industry.

oil fired boiler for pharmaceutical industry, The main advantage of circulating fluidized bed boilers lies in the direct control of pollutant discharge during the combustion process. This type of boiler adopts low-temperature combustion technology. The furnace temperature of a conventional boiler is as high as 1400-1500°C during combustion, while the furnace temperature of a circulating fluidized bed boiler is in the lower range of 800-900°C, which can reduce the generation of NOx; meanwhile, SOx can be removed during fuel combustion by adding low-cost limestone in the circulating fluidized bed boiler.

Starting from the steel sheet blanking, every key process of ZOZEN adopts advanced CNC processing technology, which ensures the quality of the boiler and shortens the delivery time. Efficient automated production lines, sufficient raw material stocking, and scientific 6S on-site management ensure that multiple SZS series gas-fired hot water boilers are delivered with high quality within the agreed time.

This time, GOTEC Group built a new plant in Toluca, Mexico, to expand its world map. As the important energy equipment for a new plant, the efficient and stable operation of the gas-fired hot water boilers would directly affect the company’s production efficiency and product quality. Based on previous friendly cooperation with ZOZEN, GOTEC Group appreciated ZOZEN’s WNS series gas-fired hot water boiler. Aiming at the characteristics of load changes in the actual production process of the Mexican plant, ZOZEN equipped the easy-to-operate PLC automatic control system for the boilers. The PLC automatic control system adopts advanced frequency conversion technology and fuzzy control technology to achieve high-efficiency and energy-saving operation by changing the gas volume of the boiler. After the automatic function is turned on, the controller can also automatically control the system according to the mode set by the user to ensure the safe and stable operation of the boiler.

Based on low-nitrogen and energy-saving technology, ZOZEN is committed to developing widely used and advanced technology, products and services. In this way, ZOZEN provides heat source support for various industries around the world to promote future cutting-edge business and realize the application dreams of users in various fields. The low-nitrogen boilers designed by ZOZEN can control the emission of NOx to lower than 30mg, which are widely used in various industries and are attractive for the national and international market.