hot water boiler cheap 20t philippines, If you have any question, welcome to consult the online customer service of ZOZEN Boiler

Over the past 30 years, ZOZEN Boiler has always adhered to the scientific management mode of modern enterprises, has always insisted on the spirit of “devotion, precision, strictness and harmony”, and has always striven for the development goal of “pursuing excellence, building a competitive brand and revitalizing the national industry”.

Facing the challenges of 2020, Wuxi Zozen Boilers Co., Ltd. has made great progress. In July, ZOZEN's Wuwei Yili project team, with wonderful performance on project construction and management in the second quarter, was awarded "Excellent Project Team". ZOZEN will continue to provide high-quality heat supply equipment for Yili Group's demonstrative project of green production and intelligent manufacturing.

hot water boiler cheap 20t philippines, ZOZEN SZS series gas-fired boiler focuses on the details of structure design. The comb-shaped plates are used for welding and sealing between the membrane walls and drums. It also designs the condensate drainage system in the convection area to prevent the acidic condensate water from corroding the furnace body, which can effectively reduce the maintenance work and extend the service life of the boiler.

ZOZEN Model Employees OF 2019

The main advantage of circulating fluidized bed boilers lies in the direct control of pollutant discharge during the combustion process. This type of boiler adopts low-temperature combustion technology. The furnace temperature of a conventional boiler is as high as 1400-1500°C during combustion, while the furnace temperature of a circulating fluidized bed boiler is in the lower range of 800-900°C, which can reduce the generation of NOx; meanwhile, SOx can be removed during fuel combustion by adding low-cost limestone in the circulating fluidized bed boiler.

The boiler hydrostatic test is a test of strength and tightness with pressurized water after the boiler or components are assembled. The main purpose of the hydrostatic test is to test the tightness and compression strength of boiler pressure-bearing components, tell whether there is leakage of welding seams, flange joints and pipe expansions, and watch the deformation conditions of pressure-bearing components with naked eyes. Practice has proved that the boiler defects can be found through the hydrostatic test, and the safety of boiler operation can be ensured after the corresponding measures are taken in time. Therefore, the hydrostatic test is an important step and means to ensure the safe boiler operation.

hot water boiler cheap 20t philippines, The complete set of WNS series gas-fired hot water boiler system customized by ZOZEN Boiler for Jilin Mingde Education adopts the corrugated furnace which not only increases the strength and flexibility of the furnace, but also enhances the flue gas disturbance to effectively improve the heat transfer effect. The threaded smoke tube with advanced manufacturing technology has been continuously optimized to effectively absorb the flame energy, and its heat transfer coefficient is 1.2 times higher than that of ordinary smoke tube. At the same time, with the additional finned tube condenser at the end of the flue gas duct, the exhaust gas temperature can be lowered and the boiler thermal efficiency can be as high as over 95%. According to the energy efficiency test conducted by the Thermal Energy Testing Center of the Special Inspection Institute, the performance indicators of the WNS series gas-fired boiler are higher than design requirements and have reached the advanced level at home and abroad.

Moreover, ZOZEN professionals provide full guidance from the installation and the trial operation of the boiler to the training of the boiler operator, so that each user can enjoy one-stop worry-free service from pre-sales to after-sales.