Most petroleum products can be used as fuel, and boiler oil is a kind of refined oil, which is widely used in power plants and industrial boilers. Boiler oil is mainly made of petroleum cracking residue oil and straight-run residue oil, which is characterized by high viscosity and high content of non-hydrocarbon compounds, gum and asphaltene.
The formula of boiler oil mainly includes the following indicators: viscosity of the boiler oil, sulphur content, density, flash point, water content and ...
Gas-fired boiler is a kind of thermal equipment that uses the thermal energy released by fuel combustion or other thermal energy to heat the medium to the rated temperature. With the strict environmental protection, gas-fired boilers are widely used in power generation, heating, factory processing and so on. Boiler thermal power refers to the continuous heat production per unit time of hot water boiler at rated parameters, rated flow, designed fuel and guaranteed efficiency. So how to convert th...
Combustion system: The combustion system of coal-fired thermal oil heater includes base, grate, furnace, etc. The combustion system of oil/gas heat-conducting oil boiler includes furnace, burner, ignition device, etc.
Oil circulation system: circulating oil pump, oil injection pump, storage tank, expansion tank, etc.
Control system: complete with boiler control box.
Air-smoke system: refers to the system composed of flue gas and air generated by combustion, mainly including induced draft fans...
As we all know, the transportation cost is generally related to the weight of the boiler, so how much does a 4-ton boiler weigh? How much steel does it contain? According to the fuel, 4-ton boilers are divided into 4-ton gas-fired boilers and 4-ton coal-fired and biomass-fired boilers. The amount of steel used for small-scale coal-fired and biomass-fired boilers is generally 5-7 times of the boiler output (excluding the front and rear arches), and about 25 tons for 4-ton boilers.
The primary air fan of the boiler consists of motor, impeller, casing, air inlet box, current collector, base, regulating control system, etc.
The working process of the primary air fan: Take the medium-speed coal mill and direct-fired pulverizing system as examples, the atmosphere enters the primary air fan and is divided into two paths after being boosted by the primary air fan. One path of the atmosphere enters the primary airpipe in front of the coal mill. The other path enters the air preh...
Heat exchange station and gas boiler room are completely different individuals. Gas-fired boiler room is a place where water (or other medium) is heated with fuel to certain parameters. Gas-fired boiler room is a place where heat source is produced. Its main equipment includes boiler, blower, induced draft fan, circulating pump, and various auxiliary equipment (water treatment), among which boiler is the main part.
The purpose of the heat exchange station is to convert the high-temperature hot ...
The principle of boiler economizer is that the flue gas from the boiler tail enters the boiler economizer, and the water in the boiler economizer absorbs the temperature in the flue gas through the finned tube and then returns to the boiler, which is equivalent to raising the boiler feed water temperature and reducing the energy consumption when the boiler output is certain.
Boiler economizer is generally installed at the tail of boiler flue. Due to the different principles and boiler equipment...
The boiler needs to blow off every day, and it is advisable to reduce the blowdown to below the boiler water level every time.
The boiler water level meter can record the boiler water level in detail, and the water level has a great influence on the boiler, so we should ensure that the boiler water level is within the normal range.
When the gas-fired boiler is running, there will be pressure inside, which can provide sufficient power for all kinds of production equipment. However, if the press...
