There are two types of burners for industrial steam boilers, depending on how they control the mixture of air and fuel at the key point in the boiler's operation, which is the generation of combustion.
Supplementary combustion boilers are a special type of boiler that injects additional fuel or gas during the combustion process to enhance the combustion efficiency and heat output of the boiler. This type of boiler finds wide applications in industrial and commercial settings, as well as for heating systems in large buildings.
The working principle of supplementary combustion boilers is relatively simple yet effective. By injecting additional fuel or gas into the primary combustion pro...
Load tracking is an important feature of industrial boilers that helps to optimize their performance and efficiency. Load tracking refers to the ability of a boiler to adjust its output in response to changes in demand.
In an industrial setting, the demand for steam or hot water can vary significantly depending on factors such as production schedules, weather conditions, and other variables. Load tracking allows the boiler to adjust its output to match the changing demand, ensuring that...
Boiler is composed of drum, combustion chamber, water wall, superheater, reheater, economizer, combustion equipment, air preheater, furnace wall and frame, and other accessories. Here, we will introduce in detail the function of the combustion chamber of the boiler and its structural diagram.
What is the function of the boiler combustion chamber?
The function of the boiler combustion chamber is to organize the space needed for fuel combustion and undertake the task of exchanging heat i...
The coal-fired boiler uses coal as fuel. The consumption of coal is a key factor to measure the efficiency of boilers. Under the same condition, the coal-fired boiler with less coal consumption can save more costs for enterprises. However, the coal consumption of coal-fired boilers is related to many factors, such as the efficiency of the boiler, the calorific value of fuel coal and the degree of coal combustion.
Attention should be paid to the monitoring of flame during boiler startup, and the following combustion adjustment work should be done well:
(1) Correct ignition. Before ignition, the furnace is fully ventilated. When ignition, put the ignition device (or torch) into operation first, and then turn on the oil gun.
(2) Put the burner diagonally into use, pay attention to switch in time, observe the proper ignition point of the burner, and strive to distribute the flame evenly in the furn...
Boiler is a kind of important thermal power equipment, which is widely used in factory power, building heating, people's life and other aspects, and is in great demand. The principle of industry is to release heat energy by burning fuel, and the boiler's anoxic combustion is not conducive to the release of heat energy. What is the judgment standard of boiler anoxic combustion?
What is anoxic combustion?
The combustion reaction can be said to be the oxidation-reduction reaction between ...
All boiler pipes have been installed and passed the hydrostatic test.
The furnace wall masonry and insulation work have all ended and has been qualified.
The flue gas duct has been installed and insulated, and the induced draft fan has been installed and debugged to be qualified and can be put into operation.
All the thermal and electrical instruments required for boiler drying have been installed and verified to be qualified.
Mortar samples have been placed on both sides of the middle par...
