A condensing boiler can condense the water vapour in the flue gases and withstand the corrosive and acidic qualities of the flue gas condensate. Although most boilers can condense the flue gasses, only boilers that have heat exchangers constructed from materials able to withstand the corrosion should be used in condensing application. Condensing boilers with primary and secondary heat exchanger do not work well as they are not able to fully condense and defeat the purpose of using a condensing boiler. Also, boilers with this arrangement are prone to condensation in the primary heat exchanger at lower firing rate which can cause damage to the heat exchanger.
One of the biggest issues related to natural gas explosions is that in the industrial world, people just don’t understand that natural gas piping repairs are different from other piping repairs.
In addition to water, other fluids can transport heat in industrial boilers, and thermal fluids usually replace water when higher temperatures are needed.
Oil Fired Boilers generally require Day Oil Tank to store oil and this oil is transported to a burner through oil piping and oil pump. On the other hand, High-Efficiency Gas Fired Boilers are exactly same as Oil Fired Boilers in construction and the only difference is the transportation of gas to burner requires gas train which comprises of the gas regulator that regulates pressure, the gas strainer to remover dirt from gas while no such valves are required in oil fired boilers.
Many business units are in contact with low-nitrogen boilers for the first time, and they do not have a good grasp of how to operate correctly and effectively extend the service life of the boiler. ZOZEN Boiler specializes in the production of low-nitrogen boilers, summarizing the following three techniques for extending the life of low-nitrogen boilers, helping users to better operate low-nitrogen boilers.
The quality of boiler feedwater is an important determinant of safe boiler operations and it should be monitored to maintain the quality within safe working limits. Boiler feedwater is treated to protect the boiler from two basic problems: the buildup of solid deposits on the interior or water side of the tubes, and corrosion.
