There are many applications of hot water boilers. With the environmental protection requirements become stricter, the hot water boilers are mostly gas-fired. Therefore, it is important to know how to use the gas-fired hot water boilers safely and what are the maintenance methods.
The slugging for the circulating fluidized bed boiler means that the bubbles in the feed layer converge and grow. When the diameter of the bubbles grows close to the cross section of the bed, the feed layer is divided into several sections to be particle layers with intervals of bubble sections. The particle layers are pushed by bubbles to move upwards to a certain height and then they burst into a large number of small particles that are thrown out of the bed and carried away by bubbles, while the large particles fall down like rain.
The biomass-fired boiler is a kind of equipment that uses the combustion of renewable energy biomass to provide heat energy for the boiler. The biomass-fired boilers are widely used especially by the enterprises located in the areas with abundant biomass fuel.
1) Set up the air preheater. One of the most effective measures to improve the thermal efficiency of thermal oil heater is to use an air preheater for heat recovery. 2) Use waste heat boiler for heat recovery. The waste heat boiler uses the waste heat in the flue gas exhausted from the thermal oil heater to heat water or generate steam.
The exhaust gas heat loss of coal-fired boiler is caused by the flue gas removed by final stage heat exchanger. The flue gas will take away a part of heat, mainly including the heat taken away by dry flue gas and the sensible heat with water vapor in the flue gas. What’s more, if the combustible gas in the coal-fired boiler is not completely burned, there will be heat loss as well. Therefore, this kind of heat loss mainly depends on the content of incomplete combustion products in the exhaust smoke.
