If the burner motor of a gas-fired boiler is running and voltage is present at the controller terminal, but there is no ignition followed by a system failure and stop, this situation can be attributed to several potential issues. Here's a breakdown of what might be happening and what to check:
Ignition System Failure: The ignition system, which may include spark electrodes or an igniter, could be faulty. Check for any signs of damage, misalignment, or dirt on the igniter or electrodes.
Control...
High exhaust temperature in a biomass-fired boiler can be caused by several factors, including:
1. Insufficient air supply: If there is not enough air supplied to the combustion chamber, the fuel may not burn completely, resulting in high exhaust temperatures.
2. Excessive fuel supply: Excessive fuel supply can overload the boiler, causing incomplete combustion and high exhaust temperatures.
3. Improper combustion: Improper combustion can lead to incomplete fuel burning and high exhaust tempe...
Generally, small gas-fired hot water boilers are between 0.7 MW and 14 MW, and the output of boilers is different, so the prices are different. Different pressures require different techniques, materials and pressures. The higher the pressure, the higher the price.
Different types of oil-fired boilers have different equipment composition. ZOZEN Boiler describes the composition of oil-fired boiler equipment aiming at WNS series and SZS series.
Because a certain amount of air is usually dissolved in water, with the increase of temperature, the solubility of air decreases, and the gas is gradually separates from the water in the process of water circulation, and gradually gathers together to form large bubbles and even gas columns. Gas is often produced due to the water supplement, so the boiler exhaust valve must be used to avoid damage to the system.
The type and parameters of coal-fired boilers are the direct factors affecting the cost of a small coal-fired boiler. For example, rated capacity, rated steam pressure, rated steam temperature, feed water temperature, etc. With different parameters, the more requirements, the higher the price.
With the rapid development of economy, the demand for industrial boilers in modern enterprises is increasing. Because of the particularity and complexity of industrial boilers, we must understand the problems clearly before purchasing. According to the question "what is the main function of boiler superheater", ZOZEN Boiler will answer the doubts first.
The rated output of boiler refers to the maximum sustained output of industrial boiler under rated parameters (pressure and temperature) and certain efficiency. For steam boilers, the rated output is also called rated capacity, and the unit is t/h (tons/hour); For a hot water boiler, the rated output of the boiler is also called the rated thermal output, and its unit is MW.
