The circulating pressure of a thermal oil boiler is generated by the driving of the circulating oil pump to the thermal oil circulation. Generally, the working pressure of the thermal oil pump is 4 ~ 8kg / cm2. Actually, the pressure of the thermal oil pump differs from different working conditions.
What are the factors that affect the maximum pressure of thermal oil heater?
1. Pressure of circulating hot oil pump
The pressure of liqu...
Boiler antifreeze, as its name implies, is a kind of regulator that can prevent the water in the boiler or boiler circulation pipe from freezing and inhibit the formation of scale. Boiler antifreeze contains a special corrosion inhibitor, which can be used and stored for a long time, keeping its characteristics unchanged, and will not damage the metal parts of the boiler.
According to the characteristics of biomass fuel, the biomass boiler produced by ZOZEN Boiler has been specially designed in structure, which has taken the lead in solving the problems such as furnace arch collapse, furnace door burn-out, hopper fire and stopper coking.
As a new mature high-efficiency and low-pollution clean coal technology, circulating fluidized bed combustion (CFBC) technology has many advantages that other combustion methods do not have. Circulating fluidized bed combustion is low-temperature combustion, so the NOx emission is much lower than that of pulverized coal furnace, only 200ppm.
Boiler feedwater treatment system includes two parts: pre-desalination system and ion exchange desalination system.
The pre-desalination system includes ultrafiltration system, reverse osmosis system, dosing system, chemical cleaning system, compressed air system, etc.
The ion exchange desalination system includes ion exchange system, acid-base regeneration system, compressed air system, wastewater neutralization treatment system, etc.
The boiler feedwater treatment methods ar...
Boiler water circulation refers to the circulating flow of water and steam-water mixture on the evaporating heating surface of boiler. What is the working principle of the latest water circulation system of boiler?
Heavy oil for industrial boilers, namely fuel oil, is mainly made from petroleum cracking residue and straight-run residue, which is characterized by high viscosity and contains many non-hydrocarbon compounds, gums and asphaltenes. Among them, the viscosity of industrial boiler special oil is an important performance index of fuel oil, and it is also the main basis for dividing fuel oil grades.
MFT means the main fuel trip. To put it simply, when the protection signal is activated, the control system automatically cuts off the boiler fuel system and links the corresponding systems and equipment, so that the whole thermal system can be safely shut down, the boiler can be protected, and the fault can be prevented from further expanding.
