The natural gas boiler heats water into hot water, which can be used for heating and bathing. It is an important accessory of natural gas hot water boiler, and it can cooperate with other equipment to ensure the long-term stable operation of the boiler. As the user is consulting which valves are in the steam-water pipeline of natural gas hot water boiler, here, ZOZEN Boiler will answer for you.
What valves are there in the steam-water pipeline of natural gas boiler?
Various valves comm...
The natural gas testing of the boiler is to measure various thermal performance parameters of the boiler in a stable working condition (that is, in a normal combustion state), so as to judge the energy efficiency of the boiler. Natural gas testing can determine the thermal efficiency of the boiler, determine the size of each heat loss of the boiler, analyze the causes of each heat loss and seek ways to reduce the heat loss, so as to improve the energy efficiency of the boiler. What is the testin...
Natural gas boiler heating is an important livelihood project, and the design of natural gas boiler heating is related to whether the heating is safe, stable, efficient and environmentally friendly. As a professional supplier of natural gas boilers, ZOZEN Boiler has summarized a heating design solution for natural gas boilers.
The working principle of natural gas boiler heating is that the circulating water is transported to the boiler inlet by the circulating water pump, and after bein...
Before degassing and dehydration, boiler parts must be checked, and detailed inspection items are as follows:
1.Burners work well, combustion is stable and combustion load change can be controlled freely.
2.Auxiliary such as FD fan, ID fan, oil system equipment and so on shall do cold test and run normally.
3.Lubricating oil shall be full filled in all bearing boxes and oil cups.
4.Inspection of safety accessories and protective equipment:
a) The needle valve or the stop valve in the pressu...
Coking methods:
a) Open the ignition door, lay wood blocks of 1-1.5m range long area in front of grate (better use refractory wood blocks like tree knot, wood plate with nails prohibited), and use cotton or other combustible to ignite.
b) Flame should be in the middle of furnace, burning evenly and can not be intermittent. During boiling, fire should be gradually strengthened to avoid sudden heating. During wood coking period, open flue damper to adopt natural ventilation.
After coking more t...
As a clean fuel, natural gas has much lower sulfur content and nitrogen content than coal, and there is no ash in the fuel, and the flue gas produced after combustion is almost smoke-free. Therefore, a nationwide upsurge of coal to gas has been set off.
However, there are some problems in the process of gas boiler operation, among which the hardness, harm and treatment of gas boiler flue gas condensate are prominent.
When the boiler flue gas temperature is lower than the dew po...
The main working principle of industry is a kind of heating equipment which uses the heat energy released after fuel combustion or the waste heat in industrial production to transfer to the medium in the container, so that the medium can reach the required temperature, and then it can be transported to the heating process for heat exchange. According to different media, boilers can be divided into many types.
Types of boiler heating medium
1. Steam, steam boiler and superheated steam b...
Precautions for long-term work in the boiler room
1. Standard setting. Nowadays, most boilers are operated by PLC control system. Therefore, when setting, the boiler should be operated according to the factory instructions, so that the boiler can work within the required range.
2. Water level and water quality. Check whether the boiler water supply facilities are normal and whether the boiler water level meets the requirements. In addition, check whether the water quality is up to standard and...
