Water treatment outside the boiler
Before entering the boiler, raw water is treated with water treatment equipment to remove impurities such as hardness, salinity, dissolved oxygen, etc., so that the feed water can meet the water quality requirements specified by steam boiler. Common water treatment equipment includes sodium ion exchange water softening equipment, ion exchange desalination equipment, reverse osmosis water purification equipment and thermal oxygen removal equipment.
...
Steam and hot water play an integral role at several stages of the textile manufacturing process. Much of the manufacturing process requires the use of steam or hot water produced by industrial boilers, textile engineering, bulk fabric production, garment manufacturing, or other textile processes.
Pre-treatment
There are several steps in this process, and some of them require both steam and hot water that is clean and pure, which requires an efficient steam boiler.
Dyeing
Dep...
The primary use of steam boiler in tire manufacturing is the vulcanizing process — the curing of the rubber needs steam to provide heat energy. Curing is a process in which chemical or physical action takes place for harder, tougher and more stable linkage.
As we know tires are the most important part of our vehicle because in all the parts of vehicle tires only remain in contact with the earth hence tires carry all the load of vehicle and passengers.
Vulcanization is a p...
Steam is very widely applied in the textile industry. It is commonly used in many subsectors and processes: manufacturing fabrics, manufacturing textile products…
A boiler economizer (also known as an economizer) are mechanical devices intended to reduce energy consumption or perform a useful function such as preheating a fluid. A boiler economizer is essentially a heat exchanger that makes a system more energy efficient by taking enthalpy in fluid streams that are hot, but not hot enough to be used in a boiler – hence recovering more useful enthalpy and improving the steam boiler’s efficiency.
If the impurities in the boiler feedwater are not dealt with properly, carryover of boiler water into the steam system can occur.
Carryover can be caused by two factors:
If the impurities in the boiler feedwater are not dealt with properly, carryover of boiler water into the steam system can occur. This may lead to problems elsewhere in the steam system, such as:
The biomass-fired steam boiler is used widely and the biomass belongs to the renewable energy with high thermal efficiency which can be applied by many production enterprises.
