Biogas is the mixture of gases produced by the breakdown of organic matter in the absence of oxygen (anaerobically), primarily consisting of methane and carbon dioxide. Biogas can be produced from raw materials such as agricultural waste, manure, municipal waste, plant material, sewage, green waste or food waste. Biogas is a renewable energy source.
Biogas is a byproduct of the decomposition of organic matter by anaerobic bacteria. Biogas is typically composed of 60% methane and 40% CO2...
Agglomeration problem mainly occurs on the fireside in the fluidized bed boilers. Agglomeration is basically the ash-related problem of biomass-fired boilers. Ashes which are formed from high-sulfur and low-ash fuel agglomerate if they are prone to sulfating condition for long time.
While the exact chemical treatment plan will be determined by a local water expert after performing an analysis of a water sample, there are some chemicals that are commonly used to treat boiler water.
Water quality is of the utmost importance in proper and safe boiler operations. An improperly treated feedwater system can result in the scaling of the boiler internals, safety equipment and auxiliary piping.
Steam is very widely applied in the textile industry. It is commonly used in many subsectors and processes: manufacturing fabrics, manufacturing textile products…
In addition to water, other fluids can transport heat in industrial boilers, and thermal fluids usually replace water when higher temperatures are needed.
Nox is the generic term for a group of highly reactive gases, all of which contain nitrogen and oxygen in varying amounts. Many of the nitrogen oxides are colorless and odorless. However, one common pollutant, nitrogen dioxide (NO2) along with particles in the air can often be seen as a reddish-brown layer over many urban areas.
Nox forms when fuel is burned at high temperatures, as in a combustion process. The primary sources of Nox are motor vehicles, electric utilities, and other industrial,...
To guarantee the successful and efficient shell boiler operation, the user must:
1)Know the conditions, environment, and demand characteristics of the plant, and accurately specify these conditions to the boiler manufacturer.
2)Provide a boiler house layout and installation that promotes good operation and maintenance.
3)Select the control systems that allow the boiler to operate safely and efficiently.
4)Select the control systems that will support the boiler in supplying dry steam to the plant at the required pressure(s) and flowrate(s).
5)Identify the fuel to be used and, if necessary, where and how the fuel reserve is to be safely stored.
