The combustion equipment of gas-fired boiler is burner and furnace. Before ignition, the burner should purge the furnace first, and then enter the ignition process. Why should the gas-fired boiler be purged before ignition?
Causes of purging before ignition of gas-fired boiler
Exhaust the pulverized coal and combustible gas that may accumulate in the furnace, flue and air preheater (or clean the pulverized coal accumulated in the primary air duct) to prevent deflagration during ignitio...
Gas-fired boiler products used in different industries will be different. With the increasingly stringent environmental protection policies issued by the state in recent years, gas-fired boilers are widely used in all walks of life. The quotation of different configurations of gas-fired boiler varies greatly, and the quotation of 3-ton gas-fired boiler does not have a fixed amount, because the quotation of 3-ton gas-fired boiler system is composed of boiler body price and auxiliary equipment pri...
Among the commonly used steam boilers, those under the pressure of 3.825 MPa are called medium pressure steam boilers, and those under the pressure from 9.8 MPa to 13 MPa are called high pressure steam boilers. Different boiler pressures have different requirements for water quality. Generally, medium and low pressure steam boilers need to supplement softened water, and softened alkali-free water, while high pressure boilers need desalted water. The different water qualities require different corresponding treatment equipment.
Water treatment outside the boiler
Before entering the boiler, raw water is treated with water treatment equipment to remove impurities such as hardness, salinity, dissolved oxygen, etc., so that the feed water can meet the water quality requirements specified by steam boiler. Common water treatment equipment includes sodium ion exchange water softening equipment, ion exchange desalination equipment, reverse osmosis water purification equipment and thermal oxygen removal equipment.
...
It's competitively priced: Wood fuel can compete on fuel price with the fossil fuel alternatives, although the costs of installing wood fuel systems can be higher than fossil fuel systems.
A steam boiler is a water containing vessel which transfers heat generated by a fuel source into steam, which is then piped and directed to points where it could be used while running industrial equipment. The basic idea here is to convert water to steam using a source of heat.
As their name implies, hot water boilers operate by being completely filled with hot water. On the other hand, steam boilers are usually only filled approximately 3/4th of the way full, while the top quarter is reserved for steam.
Whether it's an industrial hot water boiler or an industrial steam boiler, they all depend on fuel to run. The process of heating is initiated as the burner heats or eventually evaporates the water inside of it. It's actually transported via intricate pipe systems.
Steam boilers transport through the pressure created by the process, while hot water boilers use pumps to move heat throughout the system. Eventually the condensed steam or cooled water returns back through the pipes to the boiler system, so the heating process can be initiated again.
As the boiler creates heat energy, a byproduct of the process — flue gases — are exited through a chimney system. Because of this, regulating the industrial boiler emissions is a very serious issue.
