zozen boiler
HomeBoiler tagshigh temperature low pressure hot water boiler

“high temperature low pressure hot water boiler”- related faq

Tags list
  • What is the exhaust gas concentration of the biomass-fired boiler and how to deal with it in a more eco-friendly way? 2024-02-23
    The pollution discharge of the biomass-fired boiler is less than the coal-fired boiler. It is also necessary to deal with the exhaust gas of the biomass-fired boiler to meet the national standards before boiler ignition and operation.
  • What can cause an oil boilers burner to lockout? 2024-01-26
    An oil boiler's burner lockout is a common issue that can disrupt heating processes in various industrial and residential settings. This problem occurs when the boiler's control system detects a fault and, as a safety measure, shuts down the burner to prevent further damage or hazards. As a professional industrial boiler manufacturer, ZOZEN Boiler emphasizes the importance of understanding the underlying causes of burner lockouts to ensure timely and effective solutions. Here, we explore the pri...
  • What if boiler cannot be ignited in the operation when the pressure is normal? 2023-12-01
    Question details (performance):Fail ignite, normal pressure, has electricity.Answer: Fault reason:1. The ignition transformer is burnt out.2. The high-voltage wire is damaged or detached.3. The clearance is too large or too small, and the relative size of the ignition rod position is wrong.4. Electrode rupture or grounded short circuit.5. Improper spacing. Troubleshooting:1. Replace with a new one.2. Reinstall or replace.3. Readjustment.
  • What factors will affect the main steam pressure of industrial boilers? 2023-05-26
    There are many factors that can affect the main steam pressure of industrial boilers, including: 1. Quality of fuel and combustion method: The quality of fuel and combustion method directly affect the temperature and pressure in the furnace, which in turn affects the size of the main steam pressure. 2. Water quality: The quality of water is crucial for the thermal efficiency and safe operation of boilers. If there are a large amount of impurities and hardness substances in the water, it will c...
  • At what boiler water temperature can achieve better energy-saving effect? 2022-02-25
    It depends on the system of the gas boiler, the boiler water temperature at 60-90, 90-150 and 70-130 can achieve better energy-saving effect. Energy-saving devices such as condensers are added to ZOZEN gas-fired hot water boiler. The waste heat is used to increase the water temperature of the gas-fired boiler. The rated inlet temperature is 70℃, and the exhaust gas temperature is reduced, so that the thermal efficiency of the boiler is increased to over 98%.
  • What is the price of a 3-ton gas-fired hot water boiler? 2022-02-25
    Gas-fired boiler products used in different industries will be different. With the increasingly stringent environmental protection policies issued by the state in recent years, gas-fired boilers are widely used in all walks of life. The quotation of different configurations of gas-fired boiler varies greatly, and the quotation of 3-ton gas-fired boiler does not have a fixed amount, because the quotation of 3-ton gas-fired boiler system is composed of boiler body price and auxiliary equipment pri...
  • What is the formula of boiler fuel oil? 2022-02-25
    Most petroleum products can be used as fuel, and boiler oil is a kind of refined oil, which is widely used in power plants and industrial boilers. Boiler oil is mainly made of petroleum cracking residue oil and straight-run residue oil, which is characterized by high viscosity and high content of non-hydrocarbon compounds, gum and asphaltene. The formula of boiler oil mainly includes the following indicators: viscosity of the boiler oil, sulphur content, density, flash point, water content and ...
  • Why is the boiler not starting up? 2022-01-21
    Water and electricity are not available; Circulating water pump is not running; Water flow switch is different; The 200V 380V power supply is not connected; The valve is not opened; The controller switch is set incorrectly; There is a problem with the controller circuit; There is something wrong with the programmer; Leak detection has not been checked; Air pressure switch impassability; Air pressure switch 1-3 impassability; Overtemperature protection and combustion heat protection;...
1 2 3 4 5 6