As a manufacturer of SZS hot water boilers, ZOZEN Boiler's key technical advantages lie in:
High thermal efficiency: Advanced combustion technology, membrane water-cooled walls + large furnace chamber design enhance heat transfer efficiency, and the economizer reduces exhaust gas temperature, ensuring a thermal efficiency of over 96%.
Environmental emission: Equipped with low-nitrogen burners, it achieves NOx emissions below 30mg/Nm³, meeting strict environmental standards.
Intelligent c...
Boiler is a kind of thermal energy conversion equipment composed of drum and furnace. It uses fuel combustion to heat water into steam or hot water to provide power for production or help auxiliary production. With the continuous improvement of industrial manufacturing technology, boiler's control has also changed from the traditional full manual operation to the present automatic intelligent control.
Combustion Efficiency
Combustion efficiency is the effectiveness of the burner only and relates to its ability to completely burn the fuel. The boiler has little bearing on combustion efficiency. A well-designed burner will operate with as little as 15% to 20% excess air, while converting all combustibles in the fuel to thermal energy.
Thermal Efficiency
Thermal efficiency is the effectiveness of the heat transfer in a boiler. It does not take into account boiler radiation and convection losses - for example, from the boiler shell, water column piping, etc.
Fuel-to-Steam Efficiency
The coal-fired boiler has always been one of the important boiler types in the industrial production and its operating costs and capacity play an important role in the enterprise operation.
Testing a boiler's energy efficiency is essential for identifying how well it converts fuel into heat and for determining potential areas for improvement. As a professional industrial boiler manufacturer, ZOZEN Boiler emphasizes the importance of regular efficiency assessments to optimize performance, reduce fuel consumption, and minimize environmental impact. Here's a comprehensive approach to testing your boiler's energy efficiency:
1. Understand Key Efficiency RatingsAnnual Fuel Utilization ...
Selecting a biomass-fired boiler for industrial applications involves careful consideration of various parameters to ensure efficiency, sustainability, and cost-effectiveness. Biomass boilers offer an eco-friendly alternative to fossil fuel-based boilers by utilizing renewable resources like wood chips, pellets, and agricultural waste. When choosing a biomass-fired boiler, pay attention to the following parameters:
1. Fuel Type and Availability:
Type of Biomass: The type of biomass fuel availa...
If the pumps of a coal-fired boiler are not absorbing water, it could be due to several reasons. It's essential to diagnose the issue accurately for an effective solution. Here are some common causes:
Air Locks in the Pump or Suction Line: If there is trapped air within the pump or the suction line, it can prevent the pump from creating the necessary vacuum to draw water.
Low Water Level in the Feed Tank: If the water level in the feed tank is too low, the pump may not have enough water to dra...
Using artificially softened water in the heating circuit with your boiler can potentially cause issues and is not recommended.
Artificially softened water contains high levels of sodium ions, which can cause corrosion of the boiler and other components in the heating system. This corrosion can damage the boiler and other components, leading to leaks and reduced efficiency.
In addition, artificially softened water can cause problems with water pressure and flow rate, which can i...
