Water Seal: A water seal in an industrial boiler refers to a method where a certain amount of water is kept between the boiler furnace and the outside environment. This water barrier acts as a seal to prevent air leakage and the escape of ash or other byproducts of combustion. ZOZEN Boiler ensures that their boiler designs include an effective water sealing system for enhanced efficiency and safety.
Sand Seal: A sand seal is similar in function to a water seal, but instead of using wate...
Industrial steam boilers can produce noise for several reasons, including:
1. Combustion noise: Combustion noise is caused by the sound of the flames as they burn the fuel. This noise is typically louder during startup and shutdown, and can be reduced by optimizing the combustion process.
2. Boiler fan noise: Boiler fans are used to supply combustion air and to exhaust flue gases. The noise generated by the boiler fan can be reduced by installing a silencer or adjusting the fan speed.
3. Wate...
Sulfur dioxide is a common sulfur oxide, which dissolves in water to form sulfurous acid. When oxidized in the presence of PM2.5, it will quickly and efficiently generate sulfuric acid and cause acid rain. Therefore, the concentration of sulfur dioxide in boiler flue gas directly affects the environment, and is valued by many parties.
How is sulfur dioxide produced in boiler?
The principle of how sulfur dioxide is produced in boilers using different fuels is different. Sulfur in solid ...
Boiler heating is not a single boiler equipment, but heating through the boiler thermal system. So what is the boiler thermal system and what does it include?
What is the boiler thermal system
Boiler thermal system refers to the general term for conveying equipment, heat pipes, control valves, measuring instruments and monitoring instruments for conveying and distributing heating medium in the boiler room.
The role of the boiler thermal system:
1. It plays the role of connecting the ...
A hot water boiler should be thoroughly inspected at first, including the accessory pipeline. Close the drain valve and open the gauge cock to discharge the air in the boiler.
As an important heat energy supply equipment, industrial boiler is widely used in food, electronics, paper making, building materials, textiles and chemical industries. According to the medium, industrial boilers can be divided into steam boilers, hot water boilers and thermal oil heaters. In order to solve the problem "How many tons are the rated thermal power of 42 MW of industrial boiler?" First of all, we need to know the basic knowledge of rated thermal power and unit ton.
The construction and working principle of the boiler economizer is simple. At the bottom part, it has a horizontal inlet pipe through which we feed water with normal temperature to the economizer. There is another horizontal pipe fitted at the top of the economizer.
At present, the research and development technology of gas boilers is very mature. The boiler has obvious advantages of stable operation and less pollutant discharge and energy saving. However, if the boiler is not used for a long time, it is necessary to maintain the boiler to maintain the normal operation at the subsequent startup.
