The pharmaceutical sector is an area that requires the highest quality steam for its processes, known as clean steam, instead of other industrial steams. Some processes in this sector even need the highest level of quality - pure steam, which involves even stricter steam purity requirements for use in the sterilization of raw materials and pharmaceutical products at high temperatures.
The slag produced by a biomass-fired boiler can be reused to avoid energy waste and environmental pollution. There are many ways to reuse the slag. For example, the slag can be used to improve soil and improve soil performance. If it contains potassium carbonate and organic matter, it can also be used to produce compound fertilizers. In addition, the slag is a kind of plant ash, it is also a good thermal insulation material for steelmaking.
Combustion Efficiency
Combustion efficiency is the effectiveness of the burner only and relates to its ability to completely burn the fuel. The boiler has little bearing on combustion efficiency. A well-designed burner will operate with as little as 15% to 20% excess air, while converting all combustibles in the fuel to thermal energy.
Thermal Efficiency
Thermal efficiency is the effectiveness of the heat transfer in a boiler. It does not take into account boiler radiation and convection losses - for example, from the boiler shell, water column piping, etc.
Fuel-to-Steam Efficiency
Typically, a steam boiler should receive servicing at least once per year. Any kind of safety failure with a boiler can have serious consequences, and so a yearly inspection will help to spot any safety issues that need to be addressed. Servicing your boiler on a regular basis can also help you to save money on repairs. If you spot a problem during routine maintenance, there's a good chance you'll be able to fix it at a much cheaper cost than if the problem goes unnoticed and becomes a larger and more serious issue.
Gas-fired boilers use gaseous flammable gases (including liquefied combustible gases) as fuel. These gaseous fuels have relatively higher calorific value and less pollutant emissions, and are gradually becoming popular among corporate users.
Biomass boilers do produce emissions when they burn organic materials such as wood chips, pellets, or agricultural waste. The exact type and amount of emissions depend on various factors such as the type of fuel used, combustion efficiency, and air pollution control technologies in place. However, with proper design and operation, biomass boilers can emit significantly less pollutants than traditional fossil fuel boilers, making them a more environmentally friendly option for heat and power...
MFT means the main fuel trip. To put it simply, when the protection signal is activated, the control system automatically cuts off the boiler fuel system and links the corresponding systems and equipment, so that the whole thermal system can be safely shut down, the boiler can be protected, and the fault can be prevented from further expanding.
Power boilers take the chemical energy stored in fuel, convert it to heat energy in the combustion process, and transfer that heat energy to water to produce steam. The transfer of energy from combustion gases to the water and steam is called heat transfer.
