The cleaning process of the rice plant produces husks which are often treated as waste. This waste used as fuel in boiler systems and such boilers called Husk Fired Boiler. The husk fired boiler belongs to the biomass-fired boiler.
ZOZEN Boiler has developed the biomass boiler that use wood chips, straws, palm shells, mesocarp fiber, rice husk and other wastes as fuels in order to achieve zero carbon dioxide emissions. It has developed a reasonable structure of furnace arch, furnace wal...
EPA has promulgated national emission standards for hazardous air pollutants from three major source categories: Industrial boilers, commercial and institutional boilers, and process heaters. The final emission standards for control of mercury, hydrogen chloride, particulate matter (as a surrogate for non-mercury metals), and carbon monoxide (as a surrogate for organic hazardous emissions) from coal-fired, biomass-fired, and liquid-fired major source boilers are based on the maximum achievable control technology. In addition, all major source boilers and process heaters are subject to a work practice standard to periodically conduct tune-ups of the boiler or process heater.
The heat requirements of the building materials manufacturing process are very varied. A steam boiler plays a key role in the process of creating building materials. For example, materials like molded brick rely very much on steam heat from an industrial steam boiler in order to pressurize and harden the elements that make up the brick. Without exposure to that kind of heat and pressure, these materials would be a loose construction of sediment, rather than dependable, solid building components....
The primary use of steam boiler in tire manufacturing is the vulcanizing process — the curing of the rubber needs steam to provide heat energy. Curing is a process in which chemical or physical action takes place for harder, tougher and more stable linkage.
As we know tires are the most important part of our vehicle because in all the parts of vehicle tires only remain in contact with the earth hence tires carry all the load of vehicle and passengers.
Vulcanization is a p...
A boiler economizer (also known as an economizer) are mechanical devices intended to reduce energy consumption or perform a useful function such as preheating a fluid. A boiler economizer is essentially a heat exchanger that makes a system more energy efficient by taking enthalpy in fluid streams that are hot, but not hot enough to be used in a boiler – hence recovering more useful enthalpy and improving the steam boiler’s efficiency.
If the impurities in the boiler feedwater are not dealt with properly, carryover of boiler water into the steam system can occur.
Carryover can be caused by two factors:
The thermal oil heater, also called the organic heat carrier boiler, is a kind of once-through boiler developed based on the forced circulation design concept. With gas, oil or coal as the fuel and heat conducting oil as the medium, the thermal oil heater adopts the thermal oil pump to force the medium conducting the circulation in the liquid phase. The medium transfers the heat energy to the heating equipment and then returns to the furnace for being reheated. The thermal oil heater has the advantages of high-temperature and low-pressure heating and precise control of the medium.
