If the electric current of the circulating pump in a thermal oil heater is lower than the normal value, it may indicate a problem with the pump or the system. Here are some potential causes and solutions:
1. Low fluid level: If the thermal oil level is low, the pump may not be able to circulate the oil properly, leading to lower current readings. Check the fluid level and add more oil if necessary.
2. Clogged filter: A clogged filter can restrict the flow of thermal oil, causing the pump to wo...
Biomass boilers do produce emissions when they burn organic materials such as wood chips, pellets, or agricultural waste. The exact type and amount of emissions depend on various factors such as the type of fuel used, combustion efficiency, and air pollution control technologies in place. However, with proper design and operation, biomass boilers can emit significantly less pollutants than traditional fossil fuel boilers, making them a more environmentally friendly option for heat and power...
During the inspection, the management personnel of the boiler using unit and the monitor of the stoker shall be present to assist in the inspection and provide other materials required by the inspector.
Load tracking is an important feature of industrial boilers that helps to optimize their performance and efficiency. Load tracking refers to the ability of a boiler to adjust its output in response to changes in demand.
In an industrial setting, the demand for steam or hot water can vary significantly depending on factors such as production schedules, weather conditions, and other variables. Load tracking allows the boiler to adjust its output to match the changing demand, ensuring that...
High exhaust temperature in a biomass-fired boiler can be caused by several factors, including:
1. Insufficient air supply: If there is not enough air supplied to the combustion chamber, the fuel may not burn completely, resulting in high exhaust temperatures.
2. Excessive fuel supply: Excessive fuel supply can overload the boiler, causing incomplete combustion and high exhaust temperatures.
3. Improper combustion: Improper combustion can lead to incomplete fuel burning and high exhaust tempe...
A biomass-fired boiler furnace that has multiple issues such as wall cracks, deformation, coking, and tilt, loose bricks, tube wall blockage, burned-out rock wool sealing, and combustion chamber wall damage requires immediate attention to prevent further damage and potential safety hazards.
Firstly, it is recommended to shut down the boiler immediately to prevent any further damage and ensure the safety of the surrounding area. The boiler should not be restarted until all necessary repa...
Regular maintenance is essential to ensure safe and efficient operation of industrial thermal oil heaters. Here are some of the key maintenance tasks that should be performed:
1. Daily checks: The operator should perform daily checks of the heater, including checking the fuel level, the temperature of the thermal oil, and the pressure of the system.
2. Cleaning: The heater should be cleaned regularly to remove any buildup of soot, ash, or other debris that can reduce efficiency or cause damage...
Boiler economizers are devices that help to improve the efficiency of industrial boilers by recovering heat from the flue gas and transferring it to the boiler feedwater. In this article, we will explore how boiler economizers work and the benefits they offer. We will also introduce ZOZEN's boiler and economizer solutions that can help improve the energy efficiency of your industrial operations.
How Do Boiler Economizers Work?
A boiler economizer is essentially a heat exchanger that recovers w...
