The pollution discharge of the biomass-fired boiler is less than the coal-fired boiler. It is also necessary to deal with the exhaust gas of the biomass-fired boiler to meet the national standards before boiler ignition and operation.
The load control is quite significant in boiler’s operation. Both overloaded and ultra-low loaded operations have negative effects on boiler. Different types of boiler have different rated load ranges, but ultra-low loaded operation’s harm to different types of boiler is similar.
Radiation and convection losses will vary with boiler type, size, and operating pressure. The losses are typically considered constant in BTU/hr, but become a larger percentage loss as the firing rate decreases. Boiler design factors that also impact efficiencies of the boiler are heating surface, flue gas passes, and design of the boiler and burner package.
Circulation in a boiler system refers to the continuous flow of water or steam within the boiler circuit. This process is crucial for transferring heat efficiently from the combustion gases to the water or steam, ensuring that the boiler operates safely, efficiently, and effectively. As an expert in the field, ZOZEN Boiler emphasizes the importance of proper circulation for maintaining boiler performance, extending equipment lifespan, and achieving operational reliability. Let's delve into the k...
Identify the Cause: Before attempting to fix the issue, it's important to understand why the grates are stuck. Common reasons include excessive ash accumulation, warped grates due to overheating, mechanical failures, or obstructions caused by foreign objects.
Shut Down the Heater: For safety, turn off the heater before inspecting or repairing the grates. Ensure that all safety protocols are followed to prevent accidents.
Inspect for Ash and Debris: Check the grates for any ash buildup or forei...
Increased Efficiency: Economizers and condensers are designed to capture and utilize the waste heat from boiler flue gases. This process significantly improves the overall efficiency of the heating system.
Reduced Fuel Consumption: By maximizing heat recovery, these devices lower the amount of fuel needed to reach the desired temperature, leading to substantial fuel savings and reduced operating costs.
Lower Emissions: Improved efficiency translates to less fuel burned, which directly reduces ...
There are several ways to estimate the thermal efficiency of gas-fired boilers:
1. Direct method: This method involves measuring the amount of fuel consumed and the amount of heat produced by the boiler. By comparing these two values, it is possible to calculate the thermal efficiency of the boiler.
2. Indirect method: The indirect method involves measuring various parameters such as flue gas temperature, ambient air temperature, and fuel consumption, and then calculating the t...
The water level of steam drum can reflect the condition between feedwater quantity and evaporation quantity of boiler. If the two parameters maintain a stable balance, the water level also remains unchanged; otherwise, the water level will rise or fall. Besides, there is also a false water level phenomenon. How do we understand the false water level?
