How to choose industrial gas boiler?
How to choose an industrial gas boiler will first be influenced by relevant policies, regulations and normative documents. Implement relevant national laws, regulations, codes and standards, meet the requirements of energy conservation, environmental protection, safe production, economic rationality and quality assurance, and meet the requirements of urban construction planning of boiler users.
From the enterprise's point of view, how to choose an industrial gas boiler needs to consider the following factors:
1. Can the working medium, capacity and parameters of the boiler meet the heat demand? The working medium, capacity, parameters and automatic adjustment performance of the boiler should be able to meet the heat demand of the enterprise, and ensure that the capacity and parameters can effectively adapt to the heat load changes. In general, the boiler used as production steam should use steam as heating medium; Boilers with hot water for central heating, ventilation and bathing should use hot water as heating medium; The boiler for producing high-temperature heat should use organic heat carrier as heating medium.
The number and capacity of boilers should also take into account the recent capacity increase requirements of users and the reserve coefficient required for the reduction of output and thermal efficiency caused by scaling and ash accumulation after several years of boiler operation. These are all important factors in how to choose industrial gas boilers.
2. Can the boiler run safely and reliably?
Boiler design drawings and technical documents have been examined and approved by special equipment inspection and monitoring institutions; When the boiler leaves the factory, it shall be inspected by the special equipment inspection and monitoring organization where the manufacturing unit is located, and the inspection report shall be issued. The boiler nameplate shall be marked with the inspection steel seal. Boiler products must be accompanied by safety-related technical data before leaving the factory. This is an indiscernible part of how to choose industrial gas boilers.
-
SZS series gas-fired (oil-fired) steam boilerLive Chat2-110 t/h1.25-5.3 MPa
-
WNS series gas-fired (oil-fired) steam boilerLive Chat1-20 t/h0.7-2 MPa
-
SZS series gas-fired (oil-fired) hot water boilerLive Chat7-116 MW1-1.6 MPa
-
Email us
-
WhatsApp: +86 18861589035
WeChat: +86 13506150756
Live Chat

-
Packaging connects production with consumption. A carton, a piece of corrugated board, or a roll of plastic film may look light and simple, but behind each of them is a stable, continuous, and process-matched thermal energy system. As demand continues to grow in food packaging, industrial packaging, e-commerce packaging, and plastic packaging, the packaging industry is placing more specific requirements on boiler equipment: stable steam supply, fuel adaptability, process temperature control, ope...26 May 2026 -
When an industrial boiler arrives on site, what first catches a customer’s attention is often not the specification sheet, but the overall appearance of the equipment in the plant environment. For boiler equipment, exterior design is not only about visual presentation; it also reflects the manufacturer’s approach to product details, on-site management, and brand image. ZOZEN Boiler has upgraded the exterior of its SZL series biomass boiler, presenting a more unified visual design and...19 May 2026 -
From May 6 to 7, 2026, PALMEX JAKARTA 2026, the International Palm Oil Industry Equipment Exhibition, was held at JIEXPO in Jakarta, Indonesia. At booths 190 & 192, ZOZEN Boiler presented its boiler products and thermal energy solutions for industries such as palm oil processing. During the two-day exhibition, ZOZEN welcomed multiple groups of visitors, including existing clients and new prospects. Some new visitors returned to the booth several times for further discussions, and the overall...12 May 2026











