steam boiler manufacturer in south korea, high-quality ZOZEN boilers ensures the smooth operation of the production line

steam boiler manufacturer in south korea, With emission requirements changing every day, it is also important to make sure that you are proactive when selecting equipment that will comply with future air regulations. Zozen Boiler has the most experience in selecting boiler equipment that will meet current and future NOx requirements.

The after-sales service of boilers is the issues that users are very concerned about. ZOZEN is fully aware that in the current time when the homogenization of boiler products is serious, after-sales service is the core competitiveness to effectively open the gap between various boiler manufacturers. In the face of every problem encountered in the use of users' boilers,ZOZEN will regard it as their own responsibility, establish a comprehensive after-sales mechanism, responds quickly, and effectively solve problems for users.

ZOZEN SHX series CFB boiler, evaporation capacity from 10- 75 tph, with steam pressure 1.25-2.5 Mpa and the steam temperature is saturated steam and superheated steam. Hot water boiler 7-58 MW, supplies 130℃/150℃ hot water. Under pressure of 1.0-1.6 Mpa, the returning water temperature is 70℃/90℃. CFCB technology is a new type and mature high efficient, low pollution and green technology, steam boiler manufacturer in south korea.

Generally, the consumption of the steam boiler fuel in the textile industry is relatively large. Therefore, the steam boiler that provides thermal source is very important. ZOZEN customized the SZL series coal-fired chain grate steam boiler system for Xindadong Textiles (Vietnam) Co., Ltd. on the basis of the local conditions of Vietnam and the actual needs of users. This series of boiler has the advantages of high efficiency, strong overload capacity and wide adaptability of fuel types.

steam boiler manufacturer in south korea, ZOZEN WNS series gas fired boiler not only adopts advanced low NOx burners. And through the flue gas recirculation technology, about 10% -30% of the flue gas at the tail of the boiler is sucked into the air inlet of the burner through the flue gas pipe, mixed with the combustion-supporting air, and then entering the furnace, thereby reducing the temperature and oxygen concentration in the combustion area, and finally reducing The amount of thermal NOx is generated, and the NOx in the tail gas of the boiler are less than 30mg/Nm3, which meets the requirements of low nitrogen emissions of the enterprise.enterprise.

steam boiler manufacturer in south korea, In terms of pre-welding treatment, ZOZEN can be said to keep improving. The three processes of grinding and rust removal, edge milling, and vertical chamfering eliminate a large number of blowholes in the weld and ensure welding quality.

All boilers are subject to damage if proper water treatment procedures are not followed. This is an important consideration both during operation and when the boiler is idle. To avoid damage and costly repairs, monitor water chemistry routinely and ensure that you are supplying your boiler with soft water at all times.