hot water boilers in philippines, ZOZEN boiler actively develops biomass-fired boiler to promote clean energy

As we all know, quality is the foundation of enterprise development and the key to establishing a brand image. Since the establishment of ZOZEN Boiler in 1988, high product quality has become the fundamental guarantee for ZOZEN’s continuous development in the fierce market competition, hot water boilers in philippines.

hot water boilers in philippines, On November 14, a large-scale environmental protection inspection of coal-fired boilers was carried out locally in Afghanistan, and a large number of factories that did not meet environmental protection standards were closed. At the same time, the SZL series of coal-fired boiler customized by ZOZEN Boiler for Baheer Group passed the environmental protection inspection because of its sufficient output, high combustion efficiency and ultra-clean flue gas emission.

The YQW series gas-fired organic heat carrier boiler adopts a three-pass round coil structure. The coil end adopts a necked coil which can effectively protect the furnace wall at the boiler end. It is equipped with the advanced combustion device and automatic boiler operation system. The flame formed by the fuel combustion fills the round coil and transfers the radiant heat via the coil wall, which is the first pass. The high-temperature flue gas generated by combustion gathers at the rear furnace door and turns into the second pass where is the convention tube bundles area. After the convection heat exchange, the flue gas gradually cools down and then turns into the third pass via the front furnace door where is the bundles area. Finally, the flue gas passes the economizer and is exhausted into the atmosphere via the chimney, hot water boilers in philippines.

The furnace of ZOZEN SZL series coal fired boilers adopts a close-packed a close-packed arrangement of water wall tubes. The application of close-packed water wall in furnace design changes the traditional structural form of the original industrial boiler furnace water-wall, effectively preventing high-temperature flue gas from scouring and radiating the furnace. Furnace radiation area is large, maintenance workload is small, overall weight is light.

In order to ensure the accurate air distribution of biomass fired boilers, the production department of ZOZEN pays great attention to the first step in boiler manufacturing. The steel plate is cut by American Pegasus underwater plasma cutting, whose processing accuracy can be controlled within 1 mm.

Meanwhile, a set of 36 tph ZOZEN DZL series biomass-fired boiler was in installation in Shandong Province. This boiler system would provide the stable heat source support for the production base of Heze Huihao Textile Co., Ltd. with an annual output of 3,000 tons of knitted fabric and 3,000 tons of rinsed knitted fabric. ZOZEN biomass-fired boiler had a reasonable primary and secondary air ratio and the SNCR intelligent denitrification device at the boiler end, which could ensure that the NOx emission concentration was less than 50mg/Nm3 to meet the environmental protection standards in Shandong Province, helping Huihao Textile realize the ultra-low NOx emission.

With the rapid development of the aerated concrete industry, ZOZEN air preheating type gas-fired boiler has also been widely used to provide solid support for the industry development. It has always been the development goal of ZOZEN Boiler to produce boiler products that are highly compatible with various industries. In the future, ZOZEN Boiler will continue to move towards this goal and bring users more satisfactory boiler solutions.