oil boiler for plywood, with advanced and large-scale production, Wuxi ZOZEN boiler has short delivery period

As a kind of special equipment widely used in the industrial production, boilers require more strict requirements for manufacturers for the improvement of boiler performance and parameters. Wuxi ZOZEN Boilers Co., Ltd. is a professional A-grade boiler manufacturer engaged in the boiler industry for more than 30 years. The company has strong comprehensive strength, a wide range of products (boiler working pressure can be up to 5.4 Mpa), and abundant project experience.

In June of 2020, according to the development strategy of overseas market, ZOZEN Boiler made a in-depth communication and negotiation with ESCOM in Mexico and two sides reached an agreement on the cooperation details, oil boiler for plywood.

oil boiler for plywood, The SZS series oil-fired/gas-fired boiler proper adopts the D-type structure. One side is the furnace, and the other side is the convection heating surface. The partition walls around the furnace body, the partition wall between furnace and convection section, and the front and rear walls all adopt the membrane wall structure. There are foreign advanced burner, economizer and condenser installed at the end of flue gas duct, which can lower the exhaust gas temperature to 60℃, achieve the thermal efficiency of over 98% and control the emission of NOx to less than 30mg/Nm3. This kind of boiler has the characteristics of energy saving and environmental protection, safety and efficiency, simple operation and maintenance, and fully automatic control system which can realize unattended operation.

oil boiler for plywood, ZOZEN biomass-fired boilers refer to the boilers fueled by biomass energy, which are typically energy-saving and eco-friendly products. Biomass fuel usually refers to the agricultural and forestry wastes such as various crop straws, leaves, wood chips and so on, which are renewable and recyclable. The operating cost of biomass-fired boilers is low, which is only a half of that of gas-fired boilers. However, the initial investment cost of biomass-fired boilers is higher than that of oil-fired or natural gas fired boilers. Biomass-fired boilers are good alternatives to gas-fired boilers when replacing the coal-fired boilers. At present, the technical parameters of biomass-fired boilers are 2-75 tph (rated capacity) and 2.0-116 MW (rated thermal power).

In order to ensure the accurate air distribution of biomass fired boilers, the production department of ZOZEN pays great attention to the first step in boiler manufacturing. The steel plate is cut by American Pegasus underwater plasma cutting, whose processing accuracy can be controlled within 1 mm.

The thermal oil heater is also known as an organic heat carrier boiler. It uses the thermal oil as a heat medium and uses a hot oil circulation pump to force the medium to circulate in the liquid phase. After transferring the thermal energy to the heating equipment, the thermal oil returns to the furnace to be reheated. With the feature of low-pressure and high-temperature heating, the thermal oil heater has wide applications. ZOZEN has provided thermal oil heaters to many building material companies, such as Huayuan Mineral Wool Board, Ameisizhuang Mineral Wool Board, Shanghai High-New Science & Technology and etc.

One applies his knowledge to practice and his knowledge advances together with practice. Through the internal training, ZOZEN’s leaders should grasp the opportunity to change their minds, understand the essence of training and apply what they learned to practice in order to better promote the process of ZOZEN Boiler Lean Factory Standardization Project, enhance ZOZEN’s core competitiveness and help ZOZEN Boiler go further and more steadily in the fierce market competition.