The boiler economizer is a device installed at the lower part of the flue at the tail of the boiler to recover the waste heat of the exhaust gas. It absorbs the heat of the high-temperature flue gas to heat the boiler feed water, reduces the temperature of the exhaust gas of the boiler, saves energy and improves the thermal efficiency of the boiler. Therefore, when using boilers, it is very important to master the correct treatment method of boiler economizer tube burst.
Because gas-fired hot water heating boiler is used for central heating, after the boiler is ignited, it needs to go through a series of processes such as furnace heating, low-temperature operation, heat exchange and so on, to gradually heat up the central heating. After ignition of gas-fired hot water heating boiler, furnace heating is a necessary preparation work at the initial stage of heating every year, and this process takes about 3-5 days to complete.
Many people will consider the heating efficiency and heating area when choosing and using boiler equipment. In fact, how many square meters a ton of hot water boiler can heat has a certain relationship with the type and capacity of the equipment.
Generally speaking, the heat to be absorbed by 1kg of water is 1kcal for every 1℃ increase, it is concluded that the heat supply of 1 ton (0.7MW) boiler is 600,000 kcal. Therefore, how much boiler is needed to heat 20 tons of water from 15℃ to 40℃ for ...
Chain grate boiler is a very mature boiler type, which has the characteristics of simple operation and management and easy mastering, and is widely used in various industries.
1. Enterprise qualification
Which manufacturer is good, enterprise qualification is the first. On the whole, enterprise qualification reflects the enterprise's personnel quality, technology and management level, engineering equipment, capital and benefit, contract management ability and other aspects. Genera...
When it refers to how to reduce the procurement cost of industrial boilers, many corporate users will be first to take measures to effectively reduce the related costs involved in the boiler procurement process, such as the boiler equipment cost, transportation cost, loading and unloading cost, insurance cost, installation and commissioning cost, labor cost, acceptance and inspection cost.
When purchasing the gas-fired boiler, the enterprise will generally require to visit the boiler factory at the later period of boiler procurement. Via visiting the boiler factory, the enterprise can have a comprehensive understanding of the operation process, production scale, product quality details, corporate management level, factory shipment and other information of the boiler factory, and can further understand the service quality of the boiler manufacturer.
Economizer
Increase the heat exchange area of the boiler economizer. For example, adopting the economizer whose actual internal area is 1-2 times larger than the ordinary can effectively reduce the flow rate of flue gas, improve the heat exchange efficiency and lower the exhaust gas temperature.
Air preheater
An air preheater is installed with the connected pipe behind the economizer, which can effectively increase the air temperature for supporting the combustion, improve the fuel ignition ...
It depends on the system of the gas boiler, the boiler water temperature at 60-90, 90-150 and 70-130 can achieve better energy-saving effect.
Energy-saving devices such as condensers are added to ZOZEN gas-fired hot water boiler. The waste heat is used to increase the water temperature of the gas-fired boiler. The rated inlet temperature is 70℃, and the exhaust gas temperature is reduced, so that the thermal efficiency of the boiler is increased to over 98%.
