When the water level is high, the quality of steam will drop. This is because the water level will enter the steam-water separator, and the water will slide out with the steam.
In recent years, the state has stepped up efforts of prohibiting the traditional coal-fired boilers. Major enterprises keep up with the times and purchase various environmental protection boilers. Gas-fired boiler is currently the most popular environmental protection boiler. However, due to geographical limitations in some areas, natural gas is difficult to obtain, or the cost is too high, some enterprises will choose biomass steam boilers.
The main purpose of boiler acid washing is to remove iron oxide, copper scale, iron scale and other impurities in the evaporation heating surface of the boiler, and also to eliminate silicon dioxide and scale.
A hot water boiler should be thoroughly inspected at first, including the accessory pipeline. Close the drain valve and open the gauge cock to discharge the air in the boiler.
The ignition of industrial coal-fired boiler needs to be operated steps by steps, and the ignition operation is different according to the specific model of industrial coal-fired boiler. Grates of industrial coal-fired boilers are usually divided into manual grates and mechanical grates. Here, according to the different grates, the correct ignition steps of industrial coal-fired boilers are introduced in detail.
Water treatment outside the boiler
Before entering the boiler, raw water is treated with water treatment equipment to remove impurities such as hardness, salinity, dissolved oxygen, etc., so that the feed water can meet the water quality requirements specified by steam boiler. Common water treatment equipment includes sodium ion exchange water softening equipment, ion exchange desalination equipment, reverse osmosis water purification equipment and thermal oxygen removal equipment.
...
Three-drum boilers are a class of water-tube boiler used to generate steam, typically to power ships. They are compact and of high evaporative power, factors that encourage this use. Other boiler designs may be more efficient, although bulkier, and so the three-drum pattern was rare as a land-based stationary boiler.
Agglomeration problem mainly occurs on the fireside in the fluidized bed boilers. Agglomeration is basically the ash-related problem of biomass-fired boilers. Ashes which are formed from high-sulfur and low-ash fuel agglomerate if they are prone to sulfating condition for long time.
