Boiler heat supply refers to the continuous heat production per unit time when the rated parameters, rated flow, designed fuel and efficiency are guaranteed. There are many ways to express the boiler heat supply, and there are certain conversion standards.
Conversion between heat supply units: 1t/h = 0.7mw = 600,000 kcal/h =720KW
According to the conversion standard, a 5-ton boiler is also a 3.5MW boiler. Therefore, for the users who need 3 million kcal boilers, we recommend WN...
The boiler economizer is a device installed at the lower part of the flue at the tail of the boiler to recover the waste heat of the exhaust gas. It absorbs the heat of the high-temperature flue gas to heat the boiler feed water, reduces the temperature of the exhaust gas of the boiler, saves energy and improves the thermal efficiency of the boiler. Therefore, when using boilers, it is very important to master the correct treatment method of boiler economizer tube burst.
Industrial boiler is a kind of energy equipment widely used in production. The energy equipment is a boiler system composed of boiler body, combustion engine, fan, motor, etc. If you want to operate the boiler system correctly, it involves all aspects.
The first reason is unreasonable structural design.
In the operation of chain grate boiler, uneven distribution of short coal seams in grate, improper adjustment of coal feeder, unreasonable control of coal seams and poor regulation performance of air supply volume in air chamber will all lead to insufficient burning of coal.
The second reason is unreasonable setting of secondary air.
If the primary wind speed is too high, the air volume is too large, and the air rate is too large, the pulver...
When purchasing the gas-fired boiler, the enterprise will generally require to visit the boiler factory at the later period of boiler procurement. Via visiting the boiler factory, the enterprise can have a comprehensive understanding of the operation process, production scale, product quality details, corporate management level, factory shipment and other information of the boiler factory, and can further understand the service quality of the boiler manufacturer.
It depends on the system of the gas boiler, the boiler water temperature at 60-90, 90-150 and 70-130 can achieve better energy-saving effect.
Energy-saving devices such as condensers are added to ZOZEN gas-fired hot water boiler. The waste heat is used to increase the water temperature of the gas-fired boiler. The rated inlet temperature is 70℃, and the exhaust gas temperature is reduced, so that the thermal efficiency of the boiler is increased to over 98%.
1. Water leakage on the inner wall: Water leakage on the inner wall can be divided into three types: boiler leakage, water wall leakage and downcomer leakage. If the leakage holes of boiler barrel and water wall are relatively small, it is ok to use steel with the same steel grade for patching and flaw detection. If the downcomer is leaking, it needs to be replaced.
2. The hand hole leaks: you can re-install it from another angle to see if the hand hole cover is deformed. If it is deformed, you...
1. The defective parts in the last inspection.
2. Whether there are cracks and corrosion on the inner and outer surfaces of boiler pressure components, especially on openings, welds, edges and so on.
3. Whether the pipe wall is worn or corroded.
4. Whether there is any crack, fracture or corrosion at the brace of the boiler and the joint with the pulled element.
5. Whether the expansion port is tight, and whether there is annular crack in the expanded part of the pipe end.
6. Whether the ri...
