Manually close the fuel supply valve, stop the combustion, purge after the program enters, until the end of the purge, stop the program such as burning heavy oil, and enter the line sweeping stage before stopping the combustion, and purge with steam or light oil pipe; Generally, steam purging is used when stopping for a long time.
Generally, it is required that the water temperature shall be reduced to 80℃ to drain the water in the boiler. This is because if the water temperature is high, the temperature in the furnace is still very high, and the metal of the furnace wall and heating surface will still accumulate some heat. After the water is released, there is no working medium in the water wall to cool, which makes the wall temperature rise and the temperature rise is uneven, which is not conducive to the safety of the water wall.
When the water level is high, the quality of steam will drop. This is because the water level will enter the steam-water separator, and the water will slide out with the steam.
It is necessary to confirm whether the boiler pressure is correspondingly higher when steam is not used and lower when steam is used. This is mainly due to the different water pressure and volume under different pressures.
The limited space refers to a space which is closed or partially closed, relatively isolated from the outside world, with narrow entrances and exits, staff can't work in it for a long time, natural ventilation is poor, and toxic, harmful, inflammable and explosive substances or oxygen content is easy to accumulate. To define a limited space, it is necessary to meet the following three conditions at the same time, which are indispensable: the volume is large enough for people to enter completely; Or restrict the entry and exit; It's not designed to stay for a long time.
During the operation of automatic boiler water softener, the role of salt is to backwash sodium ion resin to prevent the sodium ion resin from being poisoned by iron, so the salt will not be destroyed during operation. Pay close attention to the salt content in the salt tank. As long as the salt is continuous, there is no requirement for the salt content. However, for good control, the amount of salt is generally about two-thirds of the salt tank, and then filled with water.
Recently, some users have come to consult how to solve the ash leakage at the expansion joint of boiler flue outlet. ZOZEN Boiler suggested that in case of ash leakage from the expansion joint at the boiler flue outlet, please contact the professional industrial boiler manufacturer.
Explosion doors mainly use their own weight or strength. When it is greater than or equal to the total pressure acting on the furnace at normal pressure, the explosion-proof door is closed. When the furnace pressure changes, the total pressure acting on the explosion-proof door exceeds the weight and strength of the explosion-proof door itself, the explosion-proof door will be flushed or broken, and a part of flue gas in the furnace will be released, thus achieving the purpose of pressure relief.
