When it comes to coal fired boilers, the rear arch plays a critical role in the combustion process. The main function of the rear arch is to keep the fuel particles in suspension and prevent them from falling into the ash hopper, which can lead to incomplete combustion and decreased efficiency.
At ZOZEN, we understand the importance of a well-designed rear arch for coal fired boilers. That's why our coal fired boilers are equipped with advanced rear arch designs that enhance the combust...
The coal-fired boiler uses coal as fuel. The consumption of coal is a key factor to measure the efficiency of boilers. Under the same condition, the coal-fired boiler with less coal consumption can save more costs for enterprises. However, the coal consumption of coal-fired boilers is related to many factors, such as the efficiency of the boiler, the calorific value of fuel coal and the degree of coal combustion.
Question details (Performance) :
1. The vibrating coal grate stops running totally or intermittently.
2. The current of vibrating coal grate motor rises abnormally.
3. The safety clutch of transmission machine of grate or safety pin is broken.
Answer: cause of the problem:
Boiler’s vibrating coal grate is a rotating combustion equipment, due to the bad working conditions, stuck stalling is easily happened and grate failure happens in daily application and ...
A 10 tph boiler does not mean that the dead weight of the boiler is 10 tons. The ton of the 10 tph boiler is the heat load unit of the boiler, which is used in engineering, indicating that the rated evaporation capacity of the boiler is 10 t/h.
The ignition of industrial coal-fired boiler needs to be operated steps by steps, and the ignition operation is different according to the specific model of industrial coal-fired boiler. Grates of industrial coal-fired boilers are usually divided into manual grates and mechanical grates. Here, according to the different grates, the correct ignition steps of industrial coal-fired boilers are introduced in detail.
EPA has promulgated national emission standards for hazardous air pollutants from three major source categories: Industrial boilers, commercial and institutional boilers, and process heaters. The final emission standards for control of mercury, hydrogen chloride, particulate matter (as a surrogate for non-mercury metals), and carbon monoxide (as a surrogate for organic hazardous emissions) from coal-fired, biomass-fired, and liquid-fired major source boilers are based on the maximum achievable control technology. In addition, all major source boilers and process heaters are subject to a work practice standard to periodically conduct tune-ups of the boiler or process heater.
The efficiency of a coal-fired boiler depends on the loss of the boiler, the best efficiency in the boiler can be achieved if the losses are kept to the minimum. Since 50% of the losses are dependent on the fuel and ambient condition, the best efficiency can be achieved by properly tuning the other 50%, i.e. mainly carbon loss and dry gas loss.
