An Interlock in the boiler’s control system is a programmed or hardwired condition that forces a device to be in a pre-determined or permissive state before the process can continue.
Depending on design pressure, fuel type, either liquid, gas or solid, all steam boiler require interlocks to sequence the operation and to prevent damage to the boiler. Examples of such devices are High or Low Boiler Drum Water Level, Low Boiler Feed Pump Pressure, High or Low Fuel pressure, High or Low Atomization pressure (oil fired), Proof of Ignition, Proof of Flame, FD and/or ID (solid fuel) Fan Motor Operation or combustion air pressure, Damper or Valve position and High Boiler Steam Pressure as well as O2 and furnace temperature.
Horizontal steam boiler structure
The horizontal internal combustion boiler has a large-diameter shell, in which a furnace is arranged, and the burner is placed in the furnace to form an internal combustion chamber. Both ends of the furnace are respectively connected with the front and rear tube plates, and the smoke tube is arranged between the front and rear tube plates, so there is no need for bricklaying walls outside the boiler. The structure is mainly composed of boiler shell, furnace, f...
There are many valves commonly used in atmospheric gas-fired boilers, including gate valves and stop valves of main steam valves, water supply valves, check valves, exhaust valves, etc.
When the water pump is turned on, the pressure signal is transmitted to the on-off valve of the atmospheric gas-fired boiler through the pressure pipe, the valve is opened, and the water circulation is carried out. When the water pump stops, the pressure drops, and the on-off valve is closed slowly to av...
The manufacturers with different scales will have different price policy on the natural gas boilers. The prices of natural gas steam boilers in some large boiler enterprises are higher, while those in some small enterprises are lower. The difference lies in the raw materials, the production process, the quality of employees, and the service management of the company.
The type and parameters of coal-fired boilers are the direct factors affecting the cost of a small coal-fired boiler. For example, rated capacity, rated steam pressure, rated steam temperature, feed water temperature, etc. With different parameters, the more requirements, the higher the price.
Water treatment outside the boiler
Before entering the boiler, raw water is treated with water treatment equipment to remove impurities such as hardness, salinity, dissolved oxygen, etc., so that the feed water can meet the water quality requirements specified by steam boiler. Common water treatment equipment includes sodium ion exchange water softening equipment, ion exchange desalination equipment, reverse osmosis water purification equipment and thermal oxygen removal equipment.
...
The primary use of steam boiler in tire manufacturing is the vulcanizing process — the curing of the rubber needs steam to provide heat energy. Curing is a process in which chemical or physical action takes place for harder, tougher and more stable linkage.
As we know tires are the most important part of our vehicle because in all the parts of vehicle tires only remain in contact with the earth hence tires carry all the load of vehicle and passengers.
Vulcanization is a p...
The quality of the water used to produce the steam in the boiler will have a profound effect on meeting the objectives such as safe operation, maximum combustion and heat transfer efficiency, minimum maintenance and long working life.
