A firetube boiler can react very quickly to load changes due to the fact that it has a large volume of stored energy in the form of hot water and steam.
The pharmaceutical sector is an area that requires the highest quality steam for its processes, known as clean steam, instead of other industrial steams. Some processes in this sector even need the highest level of quality - pure steam, which involves even stricter steam purity requirements for use in the sterilization of raw materials and pharmaceutical products at high temperatures.
The coal-fired boiler uses coal as fuel. The consumption of coal is a key factor to measure the efficiency of boilers. Under the same condition, the coal-fired boiler with less coal consumption can save more costs for enterprises. However, the coal consumption of coal-fired boilers is related to many factors, such as the efficiency of the boiler, the calorific value of fuel coal and the degree of coal combustion.
1) The boiler fuel has a wide application range, such as diesel, heavy oil, light oil, etc.
2) Adopting a variety of advanced energy-saving technologies, the thermal efficiency of ZOZEN oil boiler is over 98%.
3) The structure is simple, small tonnage packaged delivery, and the installation is convenient.
4) Fully intelligent automatic control and multi-level protection system.
5) Burner (blower) and flue silencing system can be equipped to reduce the noise of boiler operation.
6) Automatic...
Raw water: refers to water that has not been disinfected and filtered, such as river water, stream water, well water, reservoir water, etc.
Feed water: refers to the chemical water delivered from deaerator to boiler by feed pump.
Make-up water: Make-up water for boiler is to make up the lost part or externally supplied part after completing a steam-water cycle, so that the boiler can always operate at a safe water level.
Recycling condensing water: When the heat energy of steam or hot water i...
When the water level is high, the quality of steam will drop. This is because the water level will enter the steam-water separator, and the water will slide out with the steam.
Ensure that the vent valve on the boiler is open and check there is no pressure in the boiler. Check that the steam stop valve is closed. Check that all the valves for fuel are open, and let the fuel circulate through the system until it comes to the temperature required by the manufacturer recommendation.
Water treatment outside the boiler
Before entering the boiler, raw water is treated with water treatment equipment to remove impurities such as hardness, salinity, dissolved oxygen, etc., so that the feed water can meet the water quality requirements specified by steam boiler. Common water treatment equipment includes sodium ion exchange water softening equipment, ion exchange desalination equipment, reverse osmosis water purification equipment and thermal oxygen removal equipment.
...
