The performance parameters of a 6-ton chain grate boiler provide insight into its efficiency, safety, and operational characteristics. Here are the key parameters typically associated with a 6-ton chain grate boiler:
Rated Steam Capacity: For our topic, this is 6 tons. It indicates the amount of steam the boiler can produce per hour when it's operating at its maximum load.
Operating Pressure: This parameter defines the pressure at which the boiler operates, typically given in bar, psi, or MPa....
Proper shutdown procedures are crucial for ensuring the safe and efficient operation of a coal-fired steam boiler. The following steps should be followed when shutting down a coal-fired steam boiler:
1. Reduce the load: Before shutting down the boiler, the load should be reduced to its minimum level. This will help to prevent sudden drops in pressure and temperature, which could cause damage to the boiler and its components.
2. Shut off the fuel supply: The fuel supply to the boiler should be ...
Industrial steam boilers can produce noise for several reasons, including:
1. Combustion noise: Combustion noise is caused by the sound of the flames as they burn the fuel. This noise is typically louder during startup and shutdown, and can be reduced by optimizing the combustion process.
2. Boiler fan noise: Boiler fans are used to supply combustion air and to exhaust flue gases. The noise generated by the boiler fan can be reduced by installing a silencer or adjusting the fan speed.
3. Wate...
The quality of steam directly affects the production capacity and production cost of enterprises, and improving the quality of steam is an important foundation to maintain the safe and economic operation of thermal equipment. ZOZEN Boiler fully studies the steam composition of the boiler, from raw water treatment to daily operation and maintenance, reasonably controls the steam quality according to the standard steam quality of the steam boiler, and prolongs the service life of the boiler.
&nbs...
Before the technical communication, there is no way for any manufacturer to give an accurate figure about the price of oil-fired gas-fired steam boiler immediately.
The price of oil-fired steam boiler is mainly affected by the following factors:
1. Technical parameters such as tonnage, pressure, temperature and thermal efficiency
2. Specific system configuration and brand of the boiler
3. Manufacturing process of the boiler
4. The altitude of the area where the boiler is used
5. Freight, s...
(1) The furnace drying time depends on the shape, structure and humidity of the furnace. It takes 4 ~ 7 days for small low-pressure boilers and 10 ~ 15 days for heavy furnace walls.
(2) First, bake with wood, on the ash hopper of the room furnace and the grate of the chain furnace, use small fire for natural ventilation within 2 ~ 3 hours. When the temperature of combustion chamber rises, the ventilation capacity will be improved, and the flue damper can be turned down a little. It is best to k...
(1) The boiler and all auxiliary equipment are installed, and all tests such as ball passing test, hydrostatic test and air tightness test are qualified.
(2) All rotating devices, feed water pumps, condensate pumps, salt solution pumps, blowers and induced draft fans for coal conveying, combustion and ash removal are qualified for trial operation.
(3) The fuel and water supply are guaranteed, the steam, water and flue gas piping system are normal, and the connection unrelated to the boiler to ...
Before the boiler is put into operation, the furnace wall and arch must be baked and dried, which is called furnace drying. Furnace drying is to slowly dry the damp furnace wall and arch with warm fire to prevent ignition without furnace drying, causing cracking, deformation and serious damage.
