Reasonable arrangement of igniters in gas-fired boiler can not only obtain ideal ignition effect, but also save ignition fuel. However, due to the different types of fuel and burner, the igniter arrangement of gas boilers is different.
The advantages of boiler fueled by the methanol can be concluded as follows:
a. The emission from boiler fueled by the methanol is very environmentally friendly, without sulfur, particulate matter, heavy metals and polycyclic aromatic hydrocarbons.
b. The methanol fuel is quite cost-effective.
c. The operation of boiler fueled by the methanol is safety. Compared with compressed natural gas, liquefied petroleum gas, gasoline and diesel fuel, methanol has the char...
Chain grate has certain selectivity for coal types, and soft coal with volatile content above 15%, ash melting point above 1250℃, moderate particle size and calorific value above 18800~21000kJ/kg is more suitable.
Because a certain amount of air is usually dissolved in water, with the increase of temperature, the solubility of air decreases, and the gas is gradually separates from the water in the process of water circulation, and gradually gathers together to form large bubbles and even gas columns. Gas is often produced due to the water supplement, so the boiler exhaust valve must be used to avoid damage to the system.
MFT means the main fuel trip. To put it simply, when the protection signal is activated, the control system automatically cuts off the boiler fuel system and links the corresponding systems and equipment, so that the whole thermal system can be safely shut down, the boiler can be protected, and the fault can be prevented from further expanding.
The cleaning process of the rice plant produces husks which are often treated as waste. This waste used as fuel in boiler systems and such boilers called Husk Fired Boiler. The husk fired boiler belongs to the biomass-fired boiler.
ZOZEN Boiler has developed the biomass boiler that use wood chips, straws, palm shells, mesocarp fiber, rice husk and other wastes as fuels in order to achieve zero carbon dioxide emissions. It has developed a reasonable structure of furnace arch, furnace wal...
Steam and hot water play an integral role at several stages of the textile manufacturing process. Much of the manufacturing process requires the use of steam or hot water produced by industrial boilers, textile engineering, bulk fabric production, garment manufacturing, or other textile processes.
Pre-treatment
There are several steps in this process, and some of them require both steam and hot water that is clean and pure, which requires an efficient steam boiler.
Dyeing
Dep...
Combustion is a process which needs constant air supply for its survival, but as we move up the earth i.e. at higher altitudes, things aren’t the same as they used to be at sea level. Due to decreased air density at higher altitude, it will consume the same volume of air but will not consume the same mass of air.
This results in less fuel consumption & less steam generation rate. Due to the reduction of mass flow of gases through tubes of a steam boiler, convective heat transf...
